Found on the Internet - Hacker online: Soft anti-AON.

Track: By me composed! Xe-xe.. :)  
Author: Macros, 14 July 2K1.             
-------------------------------------------------------

            Parsing AntiAON            

              Author: Maxim              


  Today the biggest problem for
the hacker is, of course, the same
security.  On the pages of 'Hacker' already
a lot was said about safety,
and today we are not talking about how
use proxies, how to hide yours
traces, etc.  etc.  In this article I
I'll tell you a fairy tale about how to hide
your phone number from the PBX. Namely
we will talk about the program Hell Labs Anti
Caller ID.                                     
  As you know, the Russian people and,
therefore, what distinguishes a Russian hacker is
two fundamental things:                 
  1.  Laziness - but don’t forget that laziness
engine of progress.                     
  2.  Freebie is a consequence of laziness,
because You can't make money by being lazy, you have to
look for a freebie.                           
  So that’s exactly laziness, as I already said
engine of progress (this is not my thesis,
don’t look at me like Pushkin).
If it weren't for her mother's laziness, would it be possible?
there would be an Internet, hackers, etc.
This is only in the movie 'Hackers'
have laptops, have the opportunity
arrive at the station without any problems,
occupy all the phones, and also
manage to connect to the network. With us
the image of a hacker looks like this, homemade
computer, tousled hair, broken
keyboard, red teary
vampire eyes, etc. Even if
laptops, good laptops, suddenly they became
cost 50-100 dollars, it would still be
hackers did their dark deeds (or
light, when viewed from the hacker's side)
from home computers, why?
For the last time I say - LAZY.  Nobody
will go looking for broken telephone
wires to connect the laptop to the network.
Of course, it must be noted here that we are talking
is about an ordinary hacker.                  
  A hacker who fulfills orders
for example, criminal gangs,
who is trying to penetrate the FSB networks,
political hacker, in general the elite - yes,
such a hacker will do just that
vice versa (laptop,broken telephones
wires).   In general, something of an introduction
it turned out big, so let's get started
direct study of the Hell program
Labs Anti Caller ID.   That's what they say
developers about their program:   
  'Anti-Caller ID is designed to transmit
Caller ID equipment of a given number. Number
transmitted in accordance with standards,
accepted on telephone networks in countries
former USSR. Used for transmission
modem connected to telephone
lines.  For the program to work, it requires
Voice modem.  To successfully dial to
modem or fax requires two modems (one
of these may not be a Voice modem).'    
  Well, let's go?! I mean, where? Hey
you are on the 'Hacker' site, not the site
tourist adventures :)) Before,
you need to use the program
select modem. The program only works
with certain modems, and if you have
not like this, then... take this one.  Modem
must have the following functions:   
  1. Voice command support              
  2. Hardware modem (optional)    
  3. High speed of command execution,
especially related to the generation
tones                                   
  4. Support Unsigned PCM 8-bit or IMA
ADPCM (better than UPCM)                       
  5. Port speed of at least 57600 bps 
  6. Minimum sending duration
hardware tone generator no more than 40
ms (optional; only for the first
operating mode, see below)                 
  The program does not work with modems, not
supporting Voice commands, because they
cannot generate tones in a line. C
you've decided on a modem, now get into
settings -> Main program window ->
Settings.                               
  Yeah, what we see here:                 
  AT commands: needs to be configured
yourself.                                  
  AT commands are used to control
modem, you must enter in this section
AT commands of your modem, they can be found
in the modem description; if not, then on the website
modem manufacturer or manufacturer
modem chipset.                          
  Well, we've sorted out the commands -
let's move on.   Explain the meaning
buttons 'Default', 'Save to
file',I don't think it's worth 'downloading'.
Let's list the main program settings:
  'Duration of two-tone transmission'   
  Defines the duration of sending one
numbers in a non-interval packet,
sent by Caller ID.    When using
modem hardware generator value
must be a multiple of the minimum
duration of sending by tone
generator.  If the value is incorrect
Possible incorrect operation.            
  'Volume'                            
  Modem gain value
vibration transmitted to it, has
values only if not used
modem hardware tone generator.
This command uses DLE commands
to control the volume, if the value
different from zero.   For negative
values, the volume decreases.  When
too high values occur
signal distortion.                       
  'Bitrate'                              
  Sample rate value
generated oscillation matters
only if hardware is not used
modem tone generator.    When
incorrect installation - distortion
generated tones.                      
  'Minimum sending duration
modem generator'                      
  The value is used when working with
modem hardware tone generator.
The exact value can be found in the instructions
according to modem commands.  Usually .10..At
incorrect meaning - incorrect
duration of two-tone messages.      
  'Save phone number and number for
emulation'                                
  Allows you to enable memorization
last entered phone numbers. From
For safety reasons this function
disabled by default.                  
  'Use hardware tone
modem generator'                      
  Includes hardware usage
tone generator, default
disabled because   most modems
do not work correctly in this mode. If
when the option is enabled you hear
abrupt tonal messages, it means your
the modem cannot operate in this mode;
if the parcels go one after another without
intervals (even if you hear loud
clicks) then the modem is working in this mode. 
  'Use IMA ADPCM Chbit modulation'
 The value is not used during operationwith
hardware tone generator of the modem.
Enables modem transmission of oscillations
in IMA ADPCM Chbit format.   Not
recommended for use when
Possibility of using Unsigned PCM.  
  'Close the port after disconnecting from
lines'                                   
  If enabled, the program will
close the port after each shutdown
modem from the line. To restart
you need to reinitialize the modem
(press the .Re-Init. button).               
  We've sorted out the settings, let's reverse it
look at the main program window,
which, by the way, is quite small.       
  'Number'                                
  In this field you must enter the number
which will be transferred to Caller ID.  When
input, a package is automatically generated
tonal messages.                      
  'Send N times'                        
  Indicates how many times to send the number
Caller ID.                                    
  'Buttons'                               
 Emulate                            
  Starts the transfer sequence
numbers without dialing.'Re-Init'                              
  Forces the modem
reinitialize.      Used
after modem freezes or any errors.
  'Screens'                               
  Small - displays the line status.
  Big - is the terminal, in
which shows the exchange process
commands of the program with the modem.           
  And finally, two rules that
will allow you to work with the program
successful:                                 
  1. Do not select a number for emulation with
repeating numbers, for example
6666666, some caller IDs do not detect
numbers with repetitions;                     
  2. It would be better if the number for emulation
you will come up with from the numbers of your number. Well,
for example, your number is 135-4598, then
The emulation number could be like this:
439-1589.                                
 By the way, according to the developers' message
the program was tested:                 
  - using a modem based on a Rockwell chipset
RCV5bSP;                                 
  - testing was carried out on
electronic automatic telephone exchange type MT-20/25;           
  - hardware was usedgenerator
modem                                  
  All telephone caller IDs or not identified
number in general, or determined a given one.  
  You can download the program either from here:
www.freeware.ru or from the developer's website
www.helllabs.com.ua/ru_index.htm.        
  Happy.                             

  Opinions:                                

  It's okay, it's a pity I have a modem
stupid.  But on lavam.narod.ru
talks about the coolest
Russian sponsors!!!                     

  sucks, quoted the help and that's it.
F(((((((                                 
 Laziness is yes, even down to the toilet in bastard
go after 8 bottles of Razin steppe, and
The article is bullshit, yes.   Criticizing
please suggest:                  
http://www.usrsupport.ru/                

  Complete crap!!                        

  You tried it yourself
Yuyuuyuzzzzzzaat???? and Maxim!              

  Well, I'll swing it and then we'll watch ;)