---------- Track: NSH 6 By: Macros ---------- I think it wouldn't hurt to tell you something about computer repair. And this idea appeared that's why... One morning Joker called and in pain said in his voice: I need your help, Macros, my computer has crashed. To be honest, I don’t really like these situations, because I understand very well people in such cases. Judge for yourself - then what do you give a significant part of yours to? time and effort, simply stops work. Well, you made me very good you understand. So, the computer showed all signs of life, except for one - the disk drive did not respond to computer commands. When they put mine there VG'shku, the drive still does nothing wanted to upload. Well, without thinking twice, we Joker got together and took the computer to me home, because there I can repair anything. This tested many times. By the way, dead VG'shka, pulled out from Joker's computer and deliveredin my opinion, weighed the last one - it didn't even go to the initial menu! :) And it’s very good that I started the repairs with complete analysis of the computer! I always do this and never regretted it. Attentive inspection of the board and connections is never will damage. Soldered some suspicious wiring from the loop, disassembled the drive connector... Inserted your VG'shka - and... Oops! Works! Current no image. Almost... :) There is no frame synchronization, and lowercase, by the way, is not always there ;) And As luck would have it, there is no diagram! :( Well about we are trained to work with the latter. :)) It should be noted here that Joker, probably very intelligent TV, because it is somehow unknown I somehow managed synchronize, really half the top of the curb was missing. And This is how the computer worked for several years. It’s clear, there’s no way to leave such a glitch no way, I tore off the video wire from connector and began to look for it with my own methods. Found it :) Third time ;) True, at first I searched for a very long time TM'ku, which, in theory, should come line and personnel sync pulses. But I didn’t find it :))) Then The backup option is transistors. I walked for emitters - yeah, something similar, but still not the same. In two transyuks in general there were zeros on the emitters, whichme alerted me :) Then it was decided check what they have on their bases. And on one of them I caught this very signal Video. But on the signal emitter there was zero, although there was power on the collector and there is a stable signal on the base. Same thing at the next transyuk. I carefully suck one out with a suction, I check with a tester - the transition is broken, then The same thing happened to the second one. Having picked up from their food reserves, two transyuks with parameters as close as possible, I Soldered them in and turned on the power. Image it was perfect, I couldn’t even find fault with it what :) True, I had to upset Joker that still have to look for VG'shka :( B It turned out to be impossible for Kotlas to do this, but Joker did not lose heart. I'm sure soon work will begin on a new release "Murzilki" :) The moral of this story is - don't be afraid go into your computer, and if something doesn’t bother you satisfied with his work - look, and you you will definitely find it. Coming to terms with circumstances, you slow down your development. So - good luck to all radio tormentors!
Pen - Computer repair: I think it wouldn’t hurt to tell you something about computer repair.
Share your thoughts about the article