Crazy hands - To the TV master: technical menu for televisions.

 TECHNICAL MENU OF TVS  
                                         
from internet                            
-------------------------------------------------------
 Some bourgeois TVs have
contains a kind of minicomputer, glitches in
the operation of which can lead to blocking
to some parts of the TV. Without having
no “secret” information at hand,
which will allow you to pro-
believe or retune the TV, use
callers were forced to contact specialists
cialized repair centers.  Now
no need to spend money on repairs or adjustments
your TV! But I warn you - info
not tested due to lack of availability
the overwhelming number of the following app-
parathas;) Particular attention should be paid
those recommendations that need to be changed -
put something on the TV board!!! If
If you ruin something on your TV, don’t say it
that I didn't warn you...             
                                         
* AIWA TV-C142, TV-A215                  
Input: press the hidden button on the remote control,
located between buttons 8 and SYSTEM
(underfalse panel).                      
Output: same as input.                 
                                         
                  -----                  
                                         
* AIWA 1402, 2002KE, 2102KE              
Press the button located on the board
simultaneously with the CALL button on the remote control
Levizor.                                
                                         
                  -----                  
                                         
* AKAI ST-2119PDPDT, U2EU2Y2E         
Input to TEST MOD mode - on the TV
press the + and - buttons while holding them to turn on
TV.                               
Exit: press the POWER button.              
                                         
 -----                  
                                         
* EYELID                                   
Input: on the front panel, press simultaneously
There are exactly two channel switching buttons and
turn on the TV using the network toggle switch. This
allows you to select the menu language.              
                                         
                  -----                  
                                         
* FUNAI-2100A MK10 HYPER                 
To set the TV to service mode
it is necessary to short-circuit the test one on the board
TP point with the label "FACTORY MODE" until
until a red F appears on the screen
                                         
                  -----                  
                                         
* GOLDSTAR CF-25/29 С26,С36,С76 (chassis   
 MS-51V)                               
Input: press MENY, --VOL, -- at the same time
PR on the panel., OK - remember changes.
To switch to adjusting the white balance
th: =i -for GG, =? - for RG, =x - for BG. 
Output: off on the remote control.-----                  
                                         
* GOLDSTAR CF-2529С44                   
Long press the OK button on the board
Control board and yellow button on the remote control. 
                                         
                  -----                  
                                         
* GRUNDIG R 37-065                       
Input:                                    
1. Turn off with the power button.            
2. While holding down the button on the remote control (TR 711)
"i" - turn on the network.                     
3. Hold the "i" button until service is received.
sa.                                      
Exit: turn off the network.                   
                                         
                  -----                  
                                         
* GRUNDIG CUC1825 , CUC1826              
Input: Press the "i" key and the OK button.-----                  
                                         
* HITACHI C2578FS, C2589FS, SMT2578      
CHASSIS V1                             
Input: on the front panel of the TV, press
Press the TVVideo button and while holding it turn on
watch TV.                          
                                         
                  -----                  
                                         
* JVC AV-29PRO                           
Input:                                    
1. Set the volume value to 04.  
2. On the remote control - DISPLAY and MENY.               
Output: off - power.                    
                                         
                  -----                  
                                         
* JVC -21TE, G21T, G250MX                
Input: simultaneously press the "display" remote control
and "picture mode" 2 times. off timer - for-
remember.                                 
Exit: Press MUTE twice.               
                                         
                  -----                  
                                         
* JVC-C21ZE (21TE,1CHTE,21ME,1CHME,14W)    
  G21T G21OT G25MX                       
Input to the menu: [DYSPLAY]+[PICTURE MODE]    
SERVICE MENU                             
1.VSM PRESET                             
2.SUB VSM                                
3.IF V/C                                 
Menu control:                         
Press 1, 2 or 3                        
PICTURE ADJUST - SELECTING ITEMS IN THE MENU    
+PICTURE ADJUST - CHANGE ITEM       
-PICTURE ADJUST - --- // ---             
DYSPLAY - CALL MENU ON SCREEN             
OFF TIMER- SAVE CHANGES SYSTEM    
 CONSTANT                      
MUTE - SAVE CHANGES               
MUTE - OUTPUT-----                  
                                         
* LG MSbCh and MS84                         
Input:  simultaneously press OK on the remote
control and on the television panel
ra.                                      
                                         
                  -----                  
                                         
* MAGNAVOX                               
Input:                                    
1. press the following combination on the remote control -
tion: [0], [6], [2], [5], [9], [6]. Channels
will change.                         
2. Press MENU                          
Attention!  This only works on *SOME*
Magnavox TVs.                    
Output: POWER button on the TV.       
                                         
                  -----                  
                                         
* MITSUBISHI ST-21M5EETRT,             
ST-25M5EENETETNRTRTN              
Input:  press the service switch
S701 (next to the tuner), then button 9 (at
within 5 seconds).                         
 "*" - switching the adjustment dial
play;                                    
 "2" - "8" - code adjustment;           
 "6" - "4" - data adjustment;         
 "0" - write to memory;                  
 "1" - cancels changes before writing to pas-
crush.                                    
Output: stand by.                         
                                         
                  -----                  
                                         
* MITSUBISI ST-29B3EEST                  
Input: turn on the power. Click on service-
switch S701 (next to the tuner),
then button 9 (within 5 seconds). Record
- button 4. Buttons 2 and 0 change the regulation code
buttons 5 and 7 change the value
data.-----                  
                                         
* NOKIA 6364, 7364 CHASSIS 2B-F          
 (EVROSTEREO 2B-F chassis)                
Input:                                    
 1. (-/--)                               
 2. (MENU)                               
 3. (TV) - all within 1 second.     
Recording the result - MEMO.               
Output: off from the remote control.                     
                                         
                  -----                  
                                         
* NOKIA, SELECO, SABBA ITT, TELEFUNKEN   
  (STEREO PLUS chassis)                    
Input:                                    
 1. (mute)                               
 2. (OK)                                 
 3. (tv), record the result "OK"         
Output: TV-----                  
                                         
* PANASONIC (chassis MX-3, MX-ZS)          
Hotel mode:                       
 1. On the remote control - off timer, on the CH panel. UP-
included.                                
 2. On the remote control - off timer, on the panel - VOL.-
off                                    
Input:  simultaneously press RECALL on the remote control and
- VOL. on the panel.                        
Exit: press NORMAL twice on the remote control.       
                                         
                  -----                  
                                         
* PANASONIC TS-29V5OR CHASSIS MX-2A      
Enter into the adjustment mode: press the button
ku service switch S1101 (near
with "centering" switch). On the screen
the inscription SNK will appear. Button S1103 (FUN)
- selection of the required adjustment.         
Exit: press S1101.-----                  
                                         
* PANASONIC TX-21AD2C, TX-29A3C, TX-25A3C
  CHASSIS EURO-2, EURO-1                 
Set the BASS lower sound control
frequencies to maximum, TREBLE frequency control
lower audio frequencies to a minimum. Click
button F on the TV panel at the same time
but with the REVEAL button on the remote control.           
                                         
                  -----                  
                                         
* PHILIPS 2SPT8303                       
Input:  simultaneously press "?" and "sleep"
under the lid.                             
                                         
                  -----                  
                                         
* PHILIPS 1ChRT-134243, 1ChRT-1352 0 1
05 71139, 1ChRT-1542 143, 1ChRT-1552 
00 1 511, 2ORT-134243, 2ORT-154243, 
21RT-153258, 21RT-154243, 37TA-1232 3,
37TA1432 3, 37TA146218, 37TA147318,   
52TV-245219, M-2052 0 1, M2152 0 7 
15, М2182 0, М2192 5 CHASSIS L6, 1AA   
Input:                                    
1. Using the service remote control model
RC7150 press the DEFAULT or ALIGN buttons,
or:                                     
2. Short-circuit contacts S1 S2 on the process
re (pin 14 of IC7600).                  
Output: STAN-VU button.                   
                                         
                  -----                  
                                         
* PHILIPS 1ChRT-118A50B67R94R,         
1ChRT132A50B50R75R, 1ChRT133A162R,     
1ChRT137A162R, 1ChRT138A5ХR58Т67R71R 
74R75R93S, 2ORT188A50B67R73R,       
2ORT120A78R, 2ORT132A75R, 2ORT137A62R,
2ORT138A5OD58R58Н58R67R71R73R74R
75R94R97R. chassis L7.1A/AA              
1. Using the special service remote control (DST),
or                                      
2. Short-circuit service contacts M24, M25
on the printed circuit board (PCB) and turn on the power
tion.                                     
Exit: press stand by.-----                  
                                         
* PHILIPS Anubis SDD                    
Вход: замкнуть контакты М31 и М32 (земля)
рядом с IC7710.                          
Выход: STAN-ВУ.                          
                                         
                  -----                  
                                         
* PHILIPS 25РТЧO0/42, 25РТЧ10A/42,       
  28РТЧO0A/42, 28РТЧ50A/42.              
  CHASSIS GR2.2AA.                       
Вход:                                    
1. Замкнуть контакты М33 и М34 (service).
2. Нажимая клавишу INSTALL на лицевой па-
нели включите сетевой переключатель.     
Выход: клавиша STANDBY.                  
                                         
                  -----                  
                                         
* SAMSUNG CK5O38 ZRTBWCX (шасси SCT11В) 
  СКб202 СК7202 (шасси SCT12В).          
Вход:                                    
  1. (stand by)                          
  2. (р. std)                            
  3.(Help - ?)                           
  4. (sleep)                             
  5.(poWer оп)                           
Выход: STATUS или HILDDEN.               
                                         
                  -----                  
                                         
* SAMSUNG CS7272 PTRBWX CHASSIS SCT 51A,
  CS-721, CS-723                         
Вход:                                    
 1. (picture off)                        
 2. (sleep)                              
 3. (р. std)                             
 4. (mute)                               
 5. (picture оп)                         
Выход: off - питание.-----                  
                                         
* SAMSUNG TVP3350, TVP5050, TVP5350      
 (monoblock) CHASSIS: SCV11A.            
Input: Stand-Wu R. Std Menu Sleep PoWer Op
                                         
                  -----                  
                                         
* TV Samsung.  One of the combinations must
 approach:                 
Option 1: hidden button on the remote control (HID-
DEN);                                    
Option 2: StandBy - R.STD - Help - Sleep
- PoWer-Op;                              
Option 3: PICTURE OFF - SLEEP - P.STD -
MUTE - PICTURE ON.                       
                                         
                  ----- * SCHNEIDER with DTV 3, DTV 4 chassis         
Input:                                    
1. Enable the network button.              
2. Hold on remote control (remote control 204)
press red and blue simultaneously
buttons for exactly 5 seconds without releasing
them, press the TV buttons at the same time
volume+ and CH-.  Dial the combination
clearly, maintaining strict time limits
terval.                                  
Output: turn off power.                
                                         
                  -----                  
                                         
* SHARP 54AT - 15SC                      
1. Power off.                            
2. Vol -- simultaneously CH+ on the panel.    
3. Power ON on the panel and hold step 2,
will not start yet.                      
                                         
                  -----                  
                                         
* SHARP VT-1428M, VT-2128M               
Input:                                    
1. Set the TV to standby mode.
2. Press CH UP for 2 or more
seconds and simultaneously press the PO button
WER.                                     
Exit: MENU button.                      
                                         
                  -----                  
                                         
* SHARP 1ЧD-SC, 1ЧВ-SC, 2ОВ-SC, 1ЧD-SM,  
  21D-SK1, CV-2132SK1 CHASSIS PAL-A.     
Set switch S1008 to position
service mode.                      
                                         
                  -----                  
                                         
* SHARP 1ХR-SC/М8/М10, 1ЧR-W, CV-1ЧRU    
Set switch S1006 to position
service mode.                      
                                         
                  -----                  
                                         
* SHIVAKI CHASSIS 11AK19Input:                                    
1. INSTALL key                       
2. on the remote control in the following sequence -
values 4, 7, 2,5. All adjustments change -
via ADJUST.                         
                                         
                  -----                  
                                         
* SONY KV-2170, 2180, 2540 chassis VECH     
Input:                                    
 1. (?)                                  
 2. (5)                                  
 3. (+ volume)                        
 4. (tv) then MENY                      
Output: (00)                              
                                         
 -----                  
                                         
* SONY KV-E2551ABEK, KV-S29 JN1MN1  
  SN1, KV-SZCh JN1MN1SN1 , KV-S2941A    
  (AE-2B chassis)                          
Input:                                    
1. Press simultaneouslytwo buttons on pa-
any, then MENY on the RM-831 type remote control.
2. OK - remember the data. (regulate
according to the table).                             
Output: off - power.                    
                                         
                  -----                  
                                         
* SONY 25M1K KV-M1440, KV-M2171, KV-M2181
  KV-M2101                               
Input:                                    
1. TV in STAND VU                         
2. press DISPLAY on the remote control           
3. -/- 5                                 
4. -/- VOL+                              
5. -/- POWER                             
Next, press the MENU button on the remote control and
you get to 4 submenus:                   
1. SAA 7283 00 00 00 00 00               
all with tips in English. language.         
2. TDA 8366 1 13 98                      
geometry, colors, brightness, etc. Record
values MUTING - execution 2 times "0"
Data is given for remote control type RM-836.      
                                         
                  ----- * SONY KV-S2941ABDK, KV-S2942U,       
 KV-S2943E SHASSIS AE-2F                
Turn on the TV's power, and then
Press the ON button on the remote control twice. B
The inscription TT will appear in the upper right corner,
then press the MENU button.            
                                         
                  -----                  
                                         
* SONY KV-S2952 KR CHASSIS AE-3          
Use remote control type RM-831. Turn on
TV power while pressing
- and + buttons on the front panel of the TV
ra.                                      
                                         
                  -----                  
                                         
* SONY KV-G21М1G21Р1G21S11,            
 KV-T21М1Т21MF1Т21MN1Т21MN11         
Input:  press a combination of buttons on the remote control
1(UP) 4(DOWN).  Press the MUTE button to
call up the WRITE (green) screen, press the key
shu 0 for entering into memory.Exit: press the POWER button 2 times.   
                                         
                  -----                  
                                         
* TOSHIBA 2150 (chassis - S5E)             
Input:                                    
1. (mute)                                
2. (press MUTE again and do not release)    
3. (press MENY on TV)                   
"4" - contrast correction.               
"1", "2", "3" - cut-off R, G, B            
"AV" - select test signal.,         
"-- volume + " - adjustment.         
Output: off - power.                    
                                         
                  -----                  
                                         
* BRANDT, FERGUSON, NORDMENDE, SABA,     
 TELEFUNKEN, THOMSON                    
 (CHASSIS ICC9,ТХ-90,ТХ-91)             
Input:                                    
1. Stand by - with remote control                       
2. Turn off with the power button.            
3. While holding down the teletek button on the remote control
hundred (blue) - turn on the network.           
4. After turning on the TV, release
teletext.                               
5. If it doesn’t work, then in step 4 button
release the teletext and quickly briefly again
Press simultaneously.                       
Attention!  Entering the service mode is possible
wives in the absence of any signals on
scart.                                  
Output: stand-by button.                  
                                         
                  -----                  
                                         
* VCR Panasonic NV-SD205                 
Technological mode in the subject -          
[FF]+[REW]+[EJECT] according to the documentation.
Using the same buttons, held for 5 seconds,
kund, all errors are reset.           
                                         
                  -----                  
                                         
* VCR PANASONICAG-4700BY household 800,   
  950, 1000                              
Pressing fast forward at the same time
back and eject the cassette.                
-------------------------------------------------------
                                         
 DESCRIPTION OF THE CIRCUIT DIAGRAM 
   AND RESTORATION METHODS   
          KINESCOPE           
                                         
(C) Andrey Abakushin  2:5020/1630.12
-------------------------------------------------------
 The principle of restoring picture tubes is
Novan on thermal training of its cathode(s) and
shooting of spent particles from surfaces
ty cathode.  From everything you said,
we select a device for restoring kinesco-
pov                                     
                                         
      REQUIRED PARTS:      
                                         
   Transformer T1 - can be used
any power transformer from television
zora. Suitable even for old onestube
 Voltages on the transformer windings:  
7-8 - 6.3V                            
6-8 - 8V                              
5-8 - 11V                             
3-4 - voltage obtained after voltage
rectification should be 150-200V.   
Diode VD1 - you can use any rectifier
difficult or KD226 (you can put di-
one bridge). Since the voltages are 8 and 11V
such transformers do not have, then
the transformer must be wound up in order to
get these voltages.                 
                                         
Capacitor C1 - K50-(?) 1Ωf 450V;    
Switch SA2 - P2K type without locking
      ra;                                
Switches SAZ.1, SAZ.2, SAZ.3 - three-
      sectional switch type P2K with
      latch (i.e. these are three P2K connections
      tied together by one fastening, for 
      I explain to those who don’t understand, for example 
      measures, button SAZ.1 is pressed, and SAZ.2 and
      SAZ.3 are pressed out. Press SAZ.2 -     
      button SAZ.1 should pop out.);   
Resistor R1 - MLT type 20 Ohm 2W;     
Switch SAZ.1 is shown in position  
      pressed (6.3V heat is supplied);       
Switches SA2, SAZ.2, SAZ.3 - release
      you.                                


 Before connecting the device to the
check it several times to see if it's correct
you collected it. Check if it's correct
switches filament voltage with buttons
SAZ.1, SAZ.2, SAZ.3. When the button is pressed
SAZ.1 the glow should be 6.3V, when pressed
SAZ.2 - 8V, SAZ.3 - 11V. The capacitor must
Women are charged from a voltage of 150-200V.
It’s better to check it a hundred times so as not to spoil it.
turn kinescope.                           
   The device can be modified by connecting to
an ammeter to monitor currents
restored kinescope.            
   Wires on which it is written "to catalyze"
du" and "to the modulator" connect the corresponding
directly to a more worn kinesco-gun
pa.                                      
                                         
   RESTORATION METHOD:    
                                         
It is necessary to apply incandescence to the kinescope
th value in the following sequential
details:                                   
1. a) Apply 6.3V filament to the kinescope and    
      let warm up for 15 minutes.
   b) Apply 8V for 2 minutes.             
   c) Apply 11V for 2 seconds.           
2. Apply 6.3V and press the SA2 button,
thereby discharging the capacitor to the cathode -
modulator Repeat this operation 1-2 times
for.                                      
   Thenconnect the wires "to the cathode" and
"to the modulator" to the other gun and repeat
point 2. You should not change the heat.
It is better to switch these wires using
the same P2K type switch as
used when switching filament (to
not shown in the diagram because he was too lazy to draw
vat).                                   
   A restored kinescope can be
Tit for a period of 1 day to about 1-1.5
year.  It all depends on the type of kinescope and
to what extent it has already exhausted its resources.
Practical examples: (only color films
non-scope, because I don’t do b/w).         
   Best recoverable
kinescopes 61LKCHTs.  Slightly worse than 51LK2TS I
32LK2Ts and 32LKZTs are already very bad.        
   One person asked me for a diagram
kinescope restoration device
31LKCHB. I answer that this particular device
It is not suitable for its restoration, because
This kinescope has a 12V filament.           
   Also extend the service life of the shriveled
kinescope can be reduced by reducing the voltage by
cathodes or by increasing the accelerating voltage
tion.  If the kinescope has already shrunk so much that
cannot be restored, it remains
the last most critical option is to increase
reduce the intensity But after that the kinescope
completed to the end very quickly (from several
days to several weeks).