Inferno #09 31 июля 2006

Железо

Repair - The story printer repair DAEWOO DP-2210.

          Incurable problem

                   or

      Seeing the printer into another world ...


   Once upon a time, by fate, met with
one student radioinstituta - Slava.
Common theme was the Speccy. I prodemonstrival
him a few modern programs and Glory
Islands, for the good old memory, bought himself
Tower (Pentagon 128, a vertical glands
dimensional case). The system was defined
logical problems, despite the overall good performance and 
excellent state of the board. Later Glory gave me this

PC to finalize, and then did gave!


     During this Slavko many thanks!


   I modified the scheme, and hung all the standard
nye details, plus the original tape-Inter
Faith (Article not yet exist), turbocharged
SH, something corrected (logic IU
loch), hung the original kempston (one hundred
Chi has not yet been), yet the original rgbstrob (no artifacts 
- all ideal) and a unique CMOS zvukosmesi

Tel Aviv, followed by "hunting" mr.cr0acker, and
I still have not written the article. Received
almost standard and not a fancy Speccy, and
though at first I had to catch Nesco
lko disappears and dangerous bugs now
This system helps out me! Transformer
block let not the most stable, but still ve
sma compact, and only 35 watts. It I
everything I write. The only thing I did not bring -
a LPT interface and print use
old computer (Babe Steve Gibson'a / ADG).

   I was recently rescued by Magic. I forgot for
cover drive its beak, and filling in the table
characteristics of diodes, has decided to continue and
system hangs ... Again, fill out? Well, I do
no ... It is better for a change, move
remaining brain ... I put in the game
drive for shipment states through Magic,
and pressed the "magic" button. All of the successful
written. With the help of RC, I found a typed
table, create a file, copied to a disk
text, and restored the status of the disk to
tropy 0-th track, made of once before.
Had only to join the files in the editors
pe. So Magic is sometimes very helpful!


              Old printer


   Slavka went to Moscow to work, we
so very rarely seen, but - once
again - he gave me his printer. He has to
the time came the old Mac, and
I was glad to get acquainted with this miracle - the system
I really liked the theme, reminded Amiga
and all the good things that often accompanies
simple, not powerful systems. Surprised the screen
landscape type (Estimate: Tube shape
- A4 sheet). Slavka again went to Moscow
sometimes visiting the Ryazani.On going to marry
Xia and live in the city of his bride, but the body
backgrounds (sotikov) if we did not have, and the associated
zatsya we can not (although it now is).

   The printer was very old, obscure,
it seems the Japanese are firmy.Imenno was once imported and 
placed in all sorts of institutions of. Matrix, band, with 
powerful heads Coy, A4, with an inner trance and pulse

com in the secondary housing, on-chip STK. But the test of
go ... A little broken (paper output
not pressed), fell twice (and Slavka,
and I have) and I did not know how much it will stretch.

   DAEWOO DP-2210 on slightly nedosobran
components, and, probably, so there is no sound
but there is a USB flash drive (and suddenly even the 
ferromagnetic Naya memory?) and no company can cause

state of the system (when you turn on something
there harvesting) and change the settings that storage
nyatsya without pitaniya.ERROM standard series,
32 feet, I do not know what in this volume by
stuffed ... But I admit that the data could
erased, though not for another decade hwa
melting ...

   Disassembled, cleaned, oiled, zadolbalsya
connect to the ring tape. Was the case - sshi
shaft. But later, fuses, what is more complicated than
I think. Nedoplavish / smelt - sever
camping, and not once, but in the most unexpected moment.
Barely able to collect and adjust the position of
mechanism, which was very dolt and
could not properly secured in the housing.
Of course, blurry. Later bought a German
ink, which wetted tape, driving
it many times (even wrote a program for
this).

   The printer, like, normal work, not
Considering some of the non printing
vertical and generally better quality,
because of worn-out tapes and antiquity of the model.
But do not stick the needle, due to strong
head. Good comfort was photosensor
paper. But when printing had supported
alive printed part of his hand, because of
absence of the printer. Just then I
and wrote the graphics driver and an article on the instability
ndartnom driver, due to breakage of the total
water between the printer and computer (even if
can be printed, although there were glitches).

   Unfortunately, my Russian printer Elect
ronika MS 6313 (if not mistaken) is up
tvym load, due to a dead driver and the Village
glaciers during the Japanese DAEWOO, in fact, I
rescues! But over time, failures,
Head longer get off the desired position
tion, slow down / stuck on the road and
hits the edge of ... Number of successful transition
chatey began to fall. Mechanism, of course, zapy
poured and covered with a thin layer of wool (mo
tnogo fermenting koshkozavra Murzik), but I
do not give this much importance. And
Also, the top lay a pack of sheets with
kryvaya most of the system from further pain
Sheha damage. I began to suspect that the principle
ter sdyhaet of antiquity, remembering how
sdyhal me, but there was no direct analogy, though
failure mechanics are similar. I suggested that
posohli Conder, and we ought to do, remove
fee (it's not so difficult, fortunately) and
solder Conder, testing their capacity ...

   And now, the second consecutive month, gaining the text / 
letter Aleske (sister in Krasnodar, Russia), I was wondering 
how I can make it print or file, and will unsubscribe

ask anyone ... And then it took
update the phone list of relatives. File I
corrected - and decided to print ...

   Printed so ... as in the nightmare
do not dream! Line was beaten it into one
then the other side, head scary triangle
schala like a beast, and vibrated as the machine
razbaltyvaya axis of the guide from side to
side and "gnawing" obscure fonts
type and density, which were recognized bu
kvy, distorted horizontal progress ...

   Well, all ... - I thought. Printets my
printer, and write my little sister ... Became kakto lousy ... 
Many problems, and here also it is now even buy a new (thoughts 
were yes there is no extra money). Become complacent ce

BOJ: that no system - no problem; discharge
vat whole - not necessarily, though simpler;
You can chop off trance - a good block pit
of collect, there is still something on the little things ...
And then devoured conscience ... Slavka, of course, on
gave as useless, and now it does not matter
(Well, dead, thrown, of course - old). But
because most disgusting! Is not necessary - to give
Therefore you want, and here: no self - no people. Y
someone broken gear, and I threw it,
and suddenly there are only a touch away, and I
it in the trash ... Still sorry, our - action
tvym burden lies (the situation with him is already determined
thinning), do not mix, but here there is a chance
(Albeit small).

   With a heavy feelings for take out cost and starting
Naya desoldering Conder. Almost everything is normal,
one replaced - for prevention, knowing that
does not it matter. Alone, power - ca
my healthy. Included a 60-watt soldering iron
and with difficulty vypayal (4 feet, two - hardware).
But he is OK, sealed. Examined all
fee, re-measure everything that could solder on
dozritelnye place. And knowing that, in fact,
nothing is clearly not fixed, collected and included
chill (and suddenly start working properly - this
very rare, but happens). But the printer is not equal
Bothal AT ALL! I do not believe it ... Perevsta
Fork re fees, checked the hardware connections,
ascertained in impulsnika, but the printer
has not acted. Even the display was not. As
if off.

   Again, sombre thoughts and temptation: to throw
or suffer? The winner is the reason: to throw
never within, and maybe even in something -
for themselves, for the practice of understanding. Where I
climb last? And what, in fact,
touched? Capacitors - they are obviously in good order, and
ROM (perevotknul in socket). Again the transition
put ROMs - no effekta.Slegka ponazhimat
fee, who quit suddenly closes contact -
show itself - but did not help. In my thoughts
clouds ... I have already put the LED in the temple
electronics for the repose of the soul printer ... By
recent chance, last chance ... Should be
some sort of explanation ...

   What's happening? It is included? Physically
Yes, logically - no, I can not manifested itself
em. There is no movement, no indication has
tested at the beginning, not responding to
button. Hanging? Perhaps because food is
and all fuses are intact. Pull plate
that (the mechanism is disconnected), connect power
secondary housing, and watch the voltage on the legs
ROM. Strange thing - all levels are static, in
essentially zero, as if no rate and no
Why is not satisfied. Check the spider (that
in which the quartz and the CPU inside). Generator
works, but the other legs are static. Chip
hanging, doing nothing, really was dead? Not
believe that he did something, and served
without being influenced, it seems, he has not worked.
Maybe there was relief, or emergency interrupt
tion / lock. But with the company there is no signal
(Tail off), and tested it
should nezavisimo.A where reset? All Conder
go on diet, the scheme certainly different. Here
I remember that one conclusion spider hangs not in a
"Pure" logic levels, and in parts of
lta (can not remember how many). Go on the signal
Lou and I find 5-sided lapy chip
several Circuits obveski.Yavno full of trigger, or the 
comparison circuit, and to her is only one signal - the track, 
"dive ing "at the very bold Conder, which I

zadolbalsya desoldering for testing!

   Continuity print around Conder govo
rhythms that signal is formed beneath it, and is
is power line, but really nowhere
vyzvanivaetsya ... Can break? Take rezyuk,
through his shift obvesku a trigger pita
Niemi secondary housing, and a signal to the spider changes
Spider comes to life. "

   Again this is fundamentally fed to con ...
der. It turns out that broken relationship between one hundred
electrons of dress, plus Conder. I never would
had not thought of: the holes are large, and track
fat. Seal the two jumpers from the interval
O (second at minus for warranty)
collecting system. Result: It works, but the
glyukavost same, or slightly better (sorting,
cleaned up a bit from the flakes of wool). To
shorter than, came to what was ...

   Now, although the mood no good, but
Yet it became easier - after all fixed
something that he himself had created ... But Conder
You can isklyuchit.A may have Speccy interface
buggy? But the attempt to print a test (without
participation of companies) provides the same failures, well, 
maybe postabilney it ...


   Okay! Let! Try to exclude further.
I take off the cartridge belt - suddenly stuck.
result - a bit better, but the failures of lines
clearly visible, and the head slips from the
initial position, and the following attempts Pec
Tee will have shifted to the line ... Now
disable connectors igl.Uzhe not to catch hold
tsya - head can only travel freely,
Yes, and energy and less interference ... However, the backlash
head continues, and with several passes through
Dov she moves - which obviously should not be
be. While crackling-podstrevaet noticeable
but less than in print.

   Apparently, all the digital properly, but the point
actuator (stepper engine), in its management
and mechanics, and so stirred up ... Can
assume that the head podstrevaet at
current course, and the system "believes" that the ne
redvinula it to the desired distance, to
toruyu head is not really gone. Correspondingly
Twain (and stuck it into one or the other
side), prevailing, the total stuck
of shifting it to the starting position, and builds
ki astray. When you print a test Origin of
rarely goes for less symmetric
bulls in a row. But then, in fact, what
reason: Do not pull the engine, its bad commute
commute (the key is to act up), or the mechanism itself?

   From the hand of the head is moving normally, but
when the direction of a roll of friction.
Although podstrevanie is not at Reverb
ce, and during movement, and not on the same metal
degree, but where have ... Irregularity of the hand
sequence is not felt, or weak. Rubber
drive belt with teeth rejected
hand and easily noticeable, but strung like
would be quite safe. Maybe stretched / expression
bot? I barely let the screw fixation
Tension Strap - obviously it is not slid,
well was covered. I pulled up a bit
strap and fixed with screws. Result
became negative. Head moves more
worse, growls louder, often gets stuck, and the results
bag varies greatly at the moment stuck
of, and can be seen that the engine is rotated (motion
tsya scrolling tape drive, and it is from the same
engine), and head stands. The result turned out
lsya opposite!. It would seem
more grip, and the movement is worse - marasmus
of some kind. But a negative result - that
same result, I reduced the work natyazhenie.I
was almost the same, maybe a little better ...
Now is the time of analysis, it was necessary to disclose
physics contradictions ...

   Engine and transmission (control) - corrected
hand, and it is - fact! The engine pulls! And scrolled
Vaeth just as much as necessary. But the
head on a metal axle, leaning to
Lesik on the counter, moves stuck. By
Since the belt is perfectly fixed at the base
tion head (moves its own basis
of, and the head on it), then podstrevanii
He scrolls from the engine. And the
more at this point the clutch - the more
scrolling. Well, damn it - The Matrix!

   But the last fact, if all good
think, is as real as
and electron pairs in superconductors, and
in fact reveals the answer to the question - what
malfunction.

   Define all the mechanics of motion head
(Belt - the foundation - the axis - Rack - preload)
think twice - as all relationships
but? The engine we reject - he performs
doing, trying to crank the belt. Wear
the latter also eliminated its reliability, we
pressed. And therefore the whole thing can be
vysheukazanyh five veschah.Remen rigidly
ated with the base and pulls her to him without the slightest
Sheha backlash - as a whole. But the force at
This is changing, not just the stress t.k.remen
muyu pulls basis force vector almost displaced.
Basis little to the side - on the axis along which
swarm moves and on which rests. And do not
rotated it because it relies
other edge of the rack, on which rolls
small kolesiko.Na rack base letter
flax lies, and free, it can be the following
HCA lift. And given the perpendiculars
force vectors, applied to one hundred basis
yke under the weight of the entire length of the transition
displaced, stand virtually no brakes wasps
nova, not counting the weakest of rolling friction
have very small wheels. Raising
basis and reasons along, I was convinced that this
almost as easy or difficult, as in
relying on the rack.

   Rack can be excluded. Belt - as
one with the foundation. Remain on the axle and
tyag.Natyag located opposite the axis of the engines
la, on the other end of the printer, and performs
em inversion forces movement to reverse the
head. Coaxial arrangement tightness is not
change the vector of force to one end of the strap
- No-load, which is not fixed basis
va.No on another edge of the triangle formed
nick (very stupid) forces, since the strap and
from the engine, and the tightness, slightly deviates
forward - to the axis along which runs the base.
Accordingly, a force of attraction
axis, which pushes the base, to the line
connecting edge gear and stop the engine.
Y axes themselves and stop the engine friction is
rolling, almost independent of the position of
agile (triangle too dumb for the distortion
on the friction of rolling).

   Friction engine rule - he pulls. OS
remains to overcome the friction lock and friction
base of the axis, and the latter is our
problem. The fact is that when the jam
to move the head, a belt weakens
one edge, and the clutch, with a focus helps
crank fence, breaking his friction
which is almost constant throughout puti.A so
as well as in low tension is a problem,
that's not the tightness ... The point misalignment basis
of sitting on the axis through the two bearings
slip (the triangle of forces actually
- Quadrangle, have been replaced obtuse angle -
two). Skew is the difference between a de
ystviya forces applied on both sides of the OS
novaniya along the belt. And while the friction wasps
novaniya on axis is proportional to interference. A
more skewed, the more friction in the
bearings.

   But why the foundation is not on the same axis, and
side of the belt? Because changing the position
mapping axis relative to paper (literally in the
within 1 mm) can be controlled by
stroke, and a technological singularity.
And so a small difference from the axis powers did not
should cause a noticeable nagruzki.Vyhodit,
it's all about misalignment grounds for the motion
approximation of the axis, wear of bearings and their zabi
employment gryazyu.I add to this effort
printing process, which leads to failure,
but purely mechanical, but otherwise the whole
printer is working properly.

   I had to do a little clean up system
topic by removing projecting from the bearing
a mixture of dirt and grease, oil in prokapat
several places gears and axles, excluding the
the possibility of friction in the force field, and to
Of course, plenty of grease axis along which the motion
moves the head on the ground. Times impossible for
apply, you must serve! Several times from
hands moved the crown, she became noticeably
easier to move, but to determine on such
Effort rate - is doubtful. After all, seemed to me
elk - all right, but the mechanism was cha
zhelo. So and so worn the printer is not for
gryaznyalsya once again, broke clear
bag, secured with tape on the leading edge and
draped on top, pressing the paper. A
after all once before wanted to do so, and
keyboard long dust sheet blanking.


          Statistics problems ...


   Once I had to put a puck,
and it stabilized the position of the rubber
drum (before that was an additional gap
and a split in the multipass printing). In
Next time, I was thinking about how to fix os.I,
perhaps it was a time when friction is based on
tion on it has increased, and then blabbed
own head on the ground and had to
wind tape it to secure landing.

   Finally I figured out a malfunctioning and could
print phone numbers. After that, cleaned
prospirtovannoy fleece drum to boom
hectares less dirty. Even before the repair failures
Believing that this is the case, cleaned alcohol
including the head and nose prokapal needle oil
(Shoots desyatochku - not for nothing was busy).

   And that's not all ... When, after repairs
popechatal, Ninny from stability lines
I decided to pour a little kraski.Prokapyvaya
tape, 10-15 mm, and promatyvaya until
all is not running off, I was horrified at her full of holes
state. But scrolling through just 8 in a circle, for
uniform distribution of paint, put
it mesto.Poka no alternative, but many
continuous printing gives good results
and on a bad tape. But the problem is that in
place its "closure" and it stuck Village
Degree of wear.

   The next time you print (perepechaty
Val table of dates of birth), I regret that
used pseudographics. Apparently, not enough
needles, and each line with pseudographics
printer prints in two passes - and it is
twice as long. In this case, I had to stand
close and keep the paper to the printer
not struck through it and over it, pressed to
drum. And then I found a simple solution
thanks pseudographics ...

   Each time the second pass, the printer
pulling the paper back, and after, with compensation
her forward, and it is periodically torn
leaf out of the hands and demand change efforts.
Remembering the pressure roller (which I tried to
lsya a substitute), I realized that the longitudinal
to (along the motion), force applied
the paper, does not correspond to the transverse
nym that touches sheet to the drum, except that
On that sheet of the drum goes round in a circle.
But I'm not a movie to turn the finger
infinitely touching the surface of the bar
ban, but that is impossible. And if you press
sheet - will rotate with the bar
ban, and will have to intercept every
just below the skin to slide as the paper does not
get! And then came - not since the skin
zish, if your fingernail? And it was way out of
position! Only a small clamp will
Magi to the drum surface of a small but
gtya that easily glides bumaga.Srazu
thought possible and appropriate emphasis
sdelat.Kak anything then - in leaves of different
width, and purpose to make difficult.

   But I waited a couple more problems. Bu
Maga was fed not quite exactly one edge
slip, distorting the print. Again
wear and poor mounting mechanism. Had
to disassemble, to intercept the Platen pru
zhinu slightly higher and not as it should be, but
it improved clamping and in general nothing
prevented. And the loosening of the plastic
bearing, the anchor of a drum proskal
zayuschego edge, put a piece of tape, for
reduce the backlash and additional clip.
Pomoglo.No to the touch - clamp remained almost
the same as was (and unnecessary horizon
belorussian bumpiness of the paper is still
could affect the tone at pseudographics
What the paper).

   Unexpectedly, began to lag sensor eye
nchaniya paper, assuming that it is, and the shift
nut mechanism it can not. Sometimes the transition
Catal line closer to the penultimate, rather
just because it can change prizhima.No
offset is programmed in the printer
number of rows in a sheet, or by breaking the text
on the page chain of blank lines (but
part of the Pass can go to the top
next page, which is inconvenient). Although
able to intercept the print button
"Online" and reload the paper to continue
tion - the main thing is not too late!

   The latter was a bummer at the time of printing that
Blitz. Towards the end I noticed that the painting
schaya tape does not move, and if not for recent
Applying "dressing", the text at the end would be bad
viden.Prishlos zaplavlyat tattered tape
(She probably already decreased by 10 cm).
How would pokorrektney do this? Took ku
sochek tin from the inside 9V batteries
twisted it into a boat, rounded out the con
snip a little strain - and got to
cages. Holding it with tweezers at one end, the second
Roy dropped to the ends of the strip and warmed / at
melted soldering iron (pressed tin to convolutional
xy). Tape lying on a wooden ruler, and
excess heat is not required. First transition
tried and melted, a second attempt to Nedo
keep ... Had carefully doplavlyat,
picking up the tape and looking where nespla
wound, and then try again in the right
place, such as iron proglazhivaya tin par
current tape. Not a quick, but not bad, and even
seems to be more reliable than trying to warm up
tion across the province at once - at random ...

   As a result, the entire history of defeated mind! It
I'm almost resigned to the loss of the printer with
were chosen to throw it away. When I started about
problems, and I suppose could not imagine that thing
wear, combined with the zagryaznenie.Konechno,
with so many problems, it was
would be easier to buy a new printer, but how would
Anyway, now I know the real reason
Ny problems and their solutions / com
compensation. This will help me a lot more Napa
Chat - far plans have been printing graphics
discarded failures and, naturally, the reluctance
get a distorted picture).



   Remembering recent events, "fatal"
repair, and today 17.03.2006, KSA-7G.


   In early April, at 50 years of mom, neo
Jew came with Alenka aunt (sister).
But only a few days (alas). After
such a rare event remained light set
set of good memories, as well as after
my visit to him in Nalchik (autumn beg
logo of the year), which I did not even started to describe
vat. In short, Alenka really wanted me to
sent 2 cassettes (audio) with these
two events, and "meowed" at last, that
I played for her BATTY (she was very Mon
ravilos, although in a few hours znakomst
Islands with a game it could not fine her Obu
ourselves, we all had such ...). Joke, depth
post, but I did not want her to fail and hearth
small - as it more interesting to imagine.
In the end, decided to use MAGIC and napecha
assume multiple screens - in the game.
A few - turned into 35 pieces and carried
How many hours late at night! And later on
the reverse side of sheets printed the whole
story BATTY, with commentaries paintings
kam by filling out the rest of the technical information
tion and description of the processes well, and personal ...
And where, one wonders, will find the normal description
description of a game of this level in our electron
globalized world? Here you have an example to acquaint
mit close / loved one with etim.Ved
you too can a similar situation. But
talking about the other - on the press.

   I decided to write a new driver for at
ntera A4. In short, print pictures with
emulation of all grades, but across the sheet,
other positions is not enough (the last 16 something
check available). And, inspired by the normal
the present work the printer has decided to first use
call of duty 4-fold density (previously
feared for the load, and so the old technology)
printing graphics. As you know, he losses
(From the nearest points on the printed only one).
But we are losing are not needed, I decided to print on
two "components" - odd and even, in
sum - without a loss. Remembered the assembler and
overwrite the old driver for the new method.
As always, catch a few mistakes, about
gnav work without the gate and wait - do not ne
Catal. And then withdrew all grades in order
Ke increasing B / W luminance and unsealed
part of the screen. Like anything, but the printer ne
Catal weird: a few more times, but
rmalno (in this case). But not in every row
once again! Double rechecked the code and the
traces of the monitor, I realized that the case
in the printer. After BASIC, in bytes, protease
Steele's work. It turns out "to his mustache
It refers to "the printer can print a string and
twice, depending on how much the printed graph
Key in it. I. .. It seems - no loss at all!

   I rewrote the driver: gives one - half
nuyu line instead of two partial. And Save
Neil old driver for print losses.
Then copied the image to print gradations
to improve the form (and perhaps not ideal
but, but quite acceptable for matrices). As a result,
convinced that the old printer Print
em no losses! And the "user" can not
hesitate to give him all the graphics. He
it myself "comprehend" and print on your
discretion, one or two times, without
unnecessary movements on the emptiness of the beginning and end
line! And wisely distributing load
ku on the head - press evenly over two
times, and not that one - almost everything, and
the second - almost anything! This is wonderful! AND
That's it - that old printer! Yes it is - about
one hundred gift for your time! I do not know
as our printers print in those years, I do not
tried on them, such regimes, but for the old
of DAEWOO, not fitted with a buzzer (Nedo
assembly / simplification, perhaps), with bulky
engines past and not the "needle"
head - it's great! Look at this
wreck, with a stamp - sorry, I will
use - will not give up!

   However, having got a lousy ribbon
problem.Pri us to a lot of text printing session
friction, I broke it on the page, 50 lines
adding the bottom number. The printing process interrupt
shaft through the "ONLINE", sorting out the tape and
Continuing (the printer was waiting with no problems
and glitches). But it was later, and text occupy
maet little space. A print continuously all
picture, in a very difficult regime and pro
blemmnoy tape, I'm afraid. Driver of the boundary
fictions I have written a pause after printing each
line. Of course, it is inconvenient to press each
button again to continue, but it is possible to
put on it something nibud.Takaya avtopauza
lets not worry about continuity,
the printer will stop (without clicking), and
will be correct tape, and continue or
to cancel the further printing by three CCW
SIC, and buffer the printer will not be beaten residues
com images - prints the next. Scanning
are all ryady.Pauza (green border), "Snee
maetsya "by pressing" 8 ", and the abolition of" 0,9, and then
8 "- together). However, the latter does not pause
needed ... In the driver (BREAK, ... USR) has
protsedurka, drawing a test strip. Uba
vte color to zero to ensure that the incommensurate
vershenstve DAC their Speccy (B & W castle
tions should consistently increase brightness
bone - from top to bottom). Ideal would be only
in these units, like me, or those who post
ralis ...

   The old tape was dissolved in
edge, and because its thread is very firmly on
stretching, then wound onto the shaft scrolling
Key in the cartridge. Had periodically
cut pieces of yarn at the edge, and sometimes
the entire cartridge open - rasputyvat.Pra
VDA, at some point podplavil edge
tape on the soldering iron, and it is long enough
locally, only occasionally pushing the jammed flax
that. Corrupted 6 sheets, where the printer failed, and
stuck in the tape (surely only a poet
mu). Among other things, the tape almost all the paint
handed, and 35-I picture was pale by CPA
vneny with blackened pervoy.Potom Draw
shaft of a pencil, some "fallout" stamp
TUE. Normal paint enough sheets for 20
medium-gray images A4 (German, shtem
pelnoy, prokapal whole tape - continuously
even overdone - podpachkivalas boom
ha). Plot connection end of the tape from the beginning
Scrap scroll, to avoid wear and tear / terminates
Islands (although for some time, it lacks).

   Tape (store), I could not find it, but do
May it be later, but for now pomuchayus.
During the press have been observed glitches in the late
chain pechatuemoy line - a few Latin
characters on multiple lines on images, but
one - the first picture. And through no
how many pieces Speccy hung without resetting
sya.Prishlos it to climb, preloading process
cop (this computer The I hardly use it, and
He, on the floor, zapylyaetsya, and old - to
rtit discs, only use for printing and
TAPE). After this problem nebylo. For ne
chati text sometimes the printer once again about
walks the line, something dopechatyvaya, shifting
sheet, but not pseudographics. I did not understand
- Why and what he does, but glitches Print
for this. In general, seem to all
problems due to tape wear mechanics and
glitches in the old Speccy. The latter can be
explain almost everything, except for getting stuck in
tape and an uneven flow sheet (one
edge faster than the other, and print, turn
chivayas, distorted), if you do not keep up
switch feed. Over time, it would be necessary
read ROM printer until you passed out,
until all the works, and get this damn
tape!

Supplement for the third time 1.6.2006 KSA-7G.