══════════════ ════════════════════════════
DR.DEATH / SPEED Co.
══════════════ ════════════════════════════
Once again about "TURBO" in SCORPION ZS 256.
------------------------------------
A long time ago, when the trees were big
mi... No, not then, but later. I bought it once
once a computer SCORPION ZS 256K.He was everything
good, but the brakes are terrible. And I sat behind him
exactly three years and couldn’t do anything.
But somehow this magazine came to us like
SPECTROFON I don’t remember the number, but it was there
article about SCORPION,namely how it is
"turbocharge".I looked at the enta mule and
I decided that I needed to make it. When I'm for-
I started the computer, everything was as it should, but when
This left my raster a little. Attention
this was addressed much later
same when I wrote BORDER effects. On mine
Everything was cool on the car, but on others..??? A
the whole point is that the number of cycles between
du interruptions is equal to the product of the number
quality of lines (on screen) per line length
(draw time in ticks). On PENTAGONe
that turns out to be approximately 71680 clock cycles = 320
lines * 224 clock cycles.But on SCORPIONe things
they cost much worse because BORDER on top and
below really 224 clock cycles are drawn, and
the screen itself is drawn less than 128 so-
ComradeAssuming that the line is still
224 ticks, we get the number of ticks
between interrupts at SCORPIONa approximately
69888 ticks = 312 lines * 224 ticks. Yes, yes
the thing is that this mule who was
described in SPECTROFONe, did not that
other than increasing the drawing time
lines for approximately 4 clock periods and it turned out
it really seems like TURBO i.e. 312
lines * 228 clock cycles = 71136 clock cycles.but this
only an illusion. Because of this alteration on va-
Most cars will not come with branded ones at all.
new MULTICOLORand BORDER effects.
mu I just advise you to put it there
switch And for those who have not seen the article in
SPECTROFONe,I will explain the essence of the alteration. Need-
but cut off the 15 leg of the chip D4 5SSUE7
from +5 volts and through the switch this knife
turn on ground ("TURBO") or +5
volts (normal mode).
No-
into the entered conductors. P.S. Recently I was visited by the idea of a normal
small finishingSCORPIONa,i.e.
Reducing the number of lines on the screen from 312 to
320, like all normal machines.
All symbols in the figure correspond to
symbols on the SCORPIONa printed circuit board.
Anyone who has interesting thoughts
on this issue, or on the issue in general
improvements SCORPIONa, please contact
editor.
With this I say goodbye!!!
Until the next issue!!!
Write letters!!!
DR.DEATH
SPEED Co.
SAMARA CITY
02/13/1997 ═════════════════THE END══════════════════
* * * *
Share your thoughts about the article