========================================================== ALKATRAZ=====
[SPEKK-REPAIR]
I have a broken scorpion, I broke it in November 98
year. beautiful, branded, 93 years old, never
soldered! and then I removed the memory from him, now
I didn’t turn it off until I reached the switch on the block
The singing was too long.
well, I took it off and put it back. he just became something
shortly before this, brake. yeah I thought it was because
The panel is faulty, so I removed it and inserted it (the firmware).
currently after this operation my scorpion works
stopped completely. how I didn’t shake and coax him
earn again. I loved him very much and that’s why for two years
I cherished the hope that it would be repaired and that it would be with me again.
hell there.
there was absolutely nothing to do at home. somehow it became empty.
I'm not used to watching TV in the evenings. and current through
a year and a half later I agreed to get myself another spec.
a two years later, when I inserted KP11 into the panel (well
I was too lazy to turn it off too), I didn’t want the board
she bent while I pressed on her, slipped it under her from below
carefully place a screwdriver in this place.
here there was a sound characteristic of a “sparking” and my
The 230w power supply turned off, well, the short circuit protection worked.
finally stopped and this scorpion of mine starts up, squares
blink and that’s it!
why do I need squares?
right now I have another onescorpion, 08.93, beautiful, gray
like this. those two are on the shelf. waiting for something...
Now you can’t make me leave the Spectrum on
something to remove or put back or a screwdriver under it
push him, and what if he breaks on his own?
I have minimal risk of this, but suddenly...
the main problem of all spektrumists living in the 21st century is
repair problem (spectrums, obviously).
I'm sure I'm not the only one, and I wasn't the only one who had to
when one spec breaks, don’t fix it, buy another one,
carefully placing your old one on the shelf.
I love them all.
I can do it right now with high quality (ale - beautiful)replace
any mikruh in a dip-case, but you don’t know which one
exactly broken, or what... no, well, you can do all 70
change of course on the scorpion...
current theoretically.
before, we had two workshops where we worked
people who were able to do almost any spec
fix it. Well, for a fee, of course. and now?
There are no such workshops. with the people who worked there
nothing happened.
it’s just that cnekmahob has become very small and contains such
workshops became unprofitable. so they closed up
everything. after all, it was not fans who worked there, but people who wanted to earn money -
spend money.
I have a friend,who holds
a specialized telephone repair shop, well
in short, all kinds of different ones (radio / cellular / caller ID).
He always has a lot of clients, because the telephone is such a thing,
which almost everyone has.
it is clear that he could also get involved in repairing specs, current
Well, he won’t do this, because they’ll probably bring it to him in a year
five specs. if not less. so save the specs
right now - the work of the spektrumists themselves, and no one else.
I recently talked with the director of a store selling
radio components, there used to be a workshop there where they repaired
zx cars. Well, I complained to him about the situation, so he
said that there is nothing cbepxectecbehhoro in the specs,
ordinary TTL logic, and often when repairing the most
it was difficult to replace the microcircuit on the board, it’s on the boards
where the tracks were sprayed, like the boards were cheap
like this. And finally, this logic is a fascinating thing - he said!
by the way, I’m just like thisboard kp11 another one for now
installed, and almost all the contact pads are under it
fell off, some kind of shit in nature, no matter how carefully
solder - it’s all the same, there’s a hole or a path or something else.
Okay, here it is, in general terms, the principles of search
I typed in some faults - everything seems clear, naturally
there is nothing unexplained.
right now I printed a high-quality diagram of the Pentagon (I have them
two broken). These are the ones I want to train on.
oh, I wish I could fix it myself! I dream.
as knowledge accumulates (first over literature
appropriate one) I will write them down, ale on
speck it’s all about typing, well, presenting it in an accessible way
form, not in the same form where I get them from, but in
understandable, and then I’ll probably publish a special newspaper,
dedicated exclusively to repairs.
there the information will be 'in order', i.e. designed for
a person who has no knowledge in this area. in general -
everything will be clear to everyone.
I myself looked for such a newspaper on the spec, but I never found it,
I saw zxhard - there, if only they had shown her
interest, and it would be what we need! when I saw her,
then it was written there in issue 1 that since no one cares
I won’t make such a newspaper. well I didn't know
I'm talking about her, I'd really support her for everyone!
late.
so I'll do it myself. I hope you get it.
if someone also wants to do some repairs - write, we will
I will understand and play around with the logic together, I will be very
I'm glad, really! let's help each other.
it's so cool to take and fix a broken spec, well, no
vg93 change,and it’s really cool to fix it!
and if every city has at least one like this
person, then he will fix the specs (for thanks - after all, he
specman himself) to all his acquaintances, and never speculate
will die out!!!
seriously!
Share your thoughts about the article