A SET OF SCHEMES WANDERING IN NETWORKS
--------------------------------------------------------------
+------------------------------------------------------------
|Saved by : Felix Knajzev (2:5030/827.9)
|Orig.Area: SU.HARDW.TV.VIDEO
|Orig.From: Alexander Polosow (2:5025/54.32@FIDOnet.org)
|Orig.To : Victor Mihaylow (2:478/25.79@FIDOnet.org)
|Orig.Subj: "Scheme for connecting a TV to kemny"
|Orig.Date: Monday 31 May 1999
|Orig.Time: 13:48:02
+------------------------------------------------------------
Project author - Dmitriy Pugachev 2:5026/21.23@FidoNetOrg
Assistance provided by - Yura Evstigneev 2:4625/40.117@FidoNetOrg
DATA - 04/18/99
TIME - 15:21:18
VGA->TV C0NVERTER.
Works without a driver!!!!!!
---------------------------
Horizontal alignment
Питание всех микрух 5 вольт,7-ая нога минус,14-ая нога плюс.
Питание на микрухи следует подать так!!!!!!!!
If your video card complains about being connected to it
B&W monitor, then
you should increase the resistance of the input RGB resistors from 68ohm
until 7Som.
Signal designation:
VGASSI - Horizontal pulse from VGA card.
VGACSI - Frame impulse from VGA card.
VGA_R - Red signal from VGA card.
VGA_G - Green signal from VGA card.
VGA_B - Blue signal from VGA card.
TVSI - Synchro mix on TV.
TV_R - Red signal to the TV.
TV_G - Green signal to the TV.
TV_B - Blue signal to the TV.
Best regards, Dmitry Pugachev.
... Coder, artist, iron worker. (SchemeMan)
--- A beautiful rain, my rain.+ Origin: If you can’t, but really want to, then you can
+--------------------------------------------------------------
|Saved by : Felix Knajzev (2:5030/827.9)
|Orig.Area: SU.HARDW.OTHER
|Orig.From: Alex Lepihoff (2:5030/776.12)
|Orig.To : Sergey Moskovchenko (2:5037/9.36)
|Orig.Subj: "The monitor is buggy... :("
|Orig.Date: Tuesday 8 June 1999
|Orig.Time: 00:33:38
+--------------------------------------------------------------
AL>> It’s possible, but it will be easier to find an old EGA card and connect it
AL>> monitor without modification. Text (40x25, 80x25 characters, 16
AL>> gradations
AL>> gray) u graphics (320x200 u 640x200 16 shades of gray).
AL>> Mail
AL>> downloading and playing with old toys is fine. Scheme
AL>> pairings - from any Specky. It may be necessary
AL>> twist
AL>> frame rate at 60 Hz.SM> What if the frequency is programmed to be lowered to 50 Hz? there is
SM> programs
SM> allowing you to output signals from the VGA board directly to
SM> TV for example.
SM> (but it’s better without it anyway :)
The main function of vga2tv type drivers is to lower the line
up to 1SKHz. And with BOGz now almost any TV should work
(NTSC). Yes, the shovels work normally - that's CHUSTST, that
tube "Horizon" - verified ;)
By the way, I remembered - recently a circuit diagram flew by in the circuit echo
conjugation, in which the following trick is made - lowercase
the frequency from the video card is simply divided in half (we cut out each
second CCU). As a result, before loading the driver, you can at least
setup to dig deeper (we see 2 images, one of the even lines,
another of the odd ones), and if desired, you can extinguish one of them u
try to adjust the monitor settings to stretch the remaining image
horizontal direction. But to be honest, UMX0 is not worth it
pervert and display the BGA card on such a monitor.AL>> Mine only has a “video” input, so u was going to
AL>> interface circuit that converted RGBI, KS and SS into
AL>> "video". U
AL>> that's it.
SM> Ha moem I looked, there are probably 5 paths leading from the entrance
SM> this is +12B,
SM> earth, and where are the remaining 3? UMX0 is 2 synchronization u
SM> video.
They had different modifications. If no one shows
pinout, then you can figure it out directly according to the scheme (food
It won’t be difficult to find exactly).
+--------------------------------------------------------------
|Saved by : Felix Knajzev (2:5030/827.9)
|Orig.Area: SU.HARDW.OTHER
|Orig.From: Alexey Vlasenko (2:5030/232.0)
|Orig.To : Peter Grushin (2:5025/150@fidonet)
|Orig.Subj: "Connector"
|Orig.Date: Wednesday 2 June 1999|Orig.Time: 11:44:00
+--------------------------------------------------------------
Hi Peter! :)
PG> Uhtepecyet pinout of Samsung SyncMaster monitor connector
PG>1SGl
PG> or more precisely, the wiring of the adapter to the video card.
PG> 0n in two rows (9?), and not in three (15), as usual.
Lucky...;)
-------------------------------------
9 Pin 15 Pin
-------------------------------------
1-Red Red
2-Green Green
3- Blue Blue
4- H-Sync Gnd
5- V-Sync NC
6- Gnd-R Gnd-R
7- Gnd-G Gnd-G
8- Gnd-B Gnd-B
9- Gnd-Sync NC
-------------------------------------
10-Gnd-Sync11-Gnd
12-NC
13- H-Sync
14-V-Sync
15-NC
-------------------------------------
Note: NC = no Connection
... Changing: Electro-Player to Electro-Player.
If your video card complains about being connected to it B&W monitor, then you should increase the resistance of the input RGB resistors from 68ohm until 7Som. Signal designation: VGASSI - Horizontal pulse from VGA card. VGACSI - Frame impulse from VGA card. VGA_R - Red signal from VGA card. VGA_G - Green signal from VGA card. VGA_B - Blue signal from VGA card. TVSI - Synchro mix on TV. TV_R - Red signal to the TV. TV_G - Green signal to the TV. TV_B - Blue signal to the TV. Best regards, Dmitry Pugachev. ... Coder, artist, iron worker. (SchemeMan) --- A beautiful rain, my rain.+ Origin: If you can’t, but really want to, then you can +-------------------------------------------------------------- |Saved by : Felix Knajzev (2:5030/827.9) |Orig.Area: SU.HARDW.OTHER |Orig.From: Alex Lepihoff (2:5030/776.12) |Orig.To : Sergey Moskovchenko (2:5037/9.36) |Orig.Subj: "The monitor is buggy... :(" |Orig.Date: Tuesday 8 June 1999 |Orig.Time: 00:33:38 +-------------------------------------------------------------- AL>> It’s possible, but it will be easier to find an old EGA card and connect it AL>> monitor without modification. Text (40x25, 80x25 characters, 16 AL>> gradations AL>> gray) u graphics (320x200 u 640x200 16 shades of gray). AL>> Mail AL>> downloading and playing with old toys is fine. Scheme AL>> pairings - from any Specky. It may be necessary AL>> twist AL>> frame rate at 60 Hz.SM> What if the frequency is programmed to be lowered to 50 Hz? there is SM> programs SM> allowing you to output signals from the VGA board directly to SM> TV for example. SM> (but it’s better without it anyway :) The main function of vga2tv type drivers is to lower the line up to 1SKHz. And with BOGz now almost any TV should work (NTSC). Yes, the shovels work normally - that's CHUSTST, that tube "Horizon" - verified ;) By the way, I remembered - recently a circuit diagram flew by in the circuit echo conjugation, in which the following trick is made - lowercase the frequency from the video card is simply divided in half (we cut out each second CCU). As a result, before loading the driver, you can at least setup to dig deeper (we see 2 images, one of the even lines, another of the odd ones), and if desired, you can extinguish one of them u try to adjust the monitor settings to stretch the remaining image horizontal direction. But to be honest, UMX0 is not worth it pervert and display the BGA card on such a monitor.AL>> Mine only has a “video” input, so u was going to AL>> interface circuit that converted RGBI, KS and SS into AL>> "video". U AL>> that's it. SM> Ha moem I looked, there are probably 5 paths leading from the entrance SM> this is +12B, SM> earth, and where are the remaining 3? UMX0 is 2 synchronization u SM> video. They had different modifications. If no one shows pinout, then you can figure it out directly according to the scheme (food It won’t be difficult to find exactly). +-------------------------------------------------------------- |Saved by : Felix Knajzev (2:5030/827.9) |Orig.Area: SU.HARDW.OTHER |Orig.From: Alexey Vlasenko (2:5030/232.0) |Orig.To : Peter Grushin (2:5025/150@fidonet) |Orig.Subj: "Connector" |Orig.Date: Wednesday 2 June 1999|Orig.Time: 11:44:00 +-------------------------------------------------------------- Hi Peter! :) PG> Uhtepecyet pinout of Samsung SyncMaster monitor connector PG>1SGl PG> or more precisely, the wiring of the adapter to the video card. PG> 0n in two rows (9?), and not in three (15), as usual. Lucky...;) ------------------------------------- 9 Pin 15 Pin ------------------------------------- 1-Red Red 2-Green Green 3- Blue Blue 4- H-Sync Gnd 5- V-Sync NC 6- Gnd-R Gnd-R 7- Gnd-G Gnd-G 8- Gnd-B Gnd-B 9- Gnd-Sync NC ------------------------------------- 10-Gnd-Sync11-Gnd 12-NC 13- H-Sync 14-V-Sync 15-NC ------------------------------------- Note: NC = no Connection ... Changing: Electro-Player to Electro-Player.
Share your thoughts about the article