Think #03 23 августа 1997

Tips Wizard - 6 Tips DIY.

          DIY TIPS



                - 1 -


  The problem of packing a hammer does not cease

                    excite fans

                    DIY. In

                    grip makes propyl

                    hacksaw. In propyl

                    inserted steel

                    plastinka.Ruchka and plans
                    Stink drilled

                    and screwed into the hole
                    is called a screw. Ledge
                    yuschuyu part of the plate

                    being cut, then
                    sazhivayut the handle can
                    tray, and bend the ends

                    plate.



                - 2 -


  Hang on a wall speaker with concealed hinges not so 
prosto.Chtoby this work is not taken much time and was carried 
out flawlessly, "DIY" proposes to use a sheet of paper.

Initially the holes are marked on it, and already
holes are transferred from paper onto the wall.



                - 3 -



  Simple masking frame can be done in minutes. Materials needed 
most affordable: smooth plaque, two wooden bars and two rubber 
flagellum. Frame design is clear from the figure. 



                           - 4 -



                    To make a circle
                  luyu wand (for example,

                  furniture spines), very

                  not necessarily have the
                  Karney machine. Sufficient
                  but ozavestis metal
                  cally plate with a corresponding
                  TIFA different diameters
                  pa. The record is based

                  on sponge grip, wooden
                  Naya harvesting sharpens
                  Xia and is run through

                  vent with model
                  tray.



                - 5 -


  For storing manifested films "DIY" offers
packing boxes in which the film is sold. They stick together
and invested in some big box or glued over with thick paper.
Lids of boxes cut is not necessary, they will be useful for the 
inscriptions and, in addition, protect it from dust. 



                - 6 -


  If you do not have to hand shears for metal,
sheet roofing iron can be quickly and neatly cut can opener. For
this sheet to bend to the cut line
and fold tapped mallets. Through the acquisition of fold 
stiffness knife does not go astray a straight line.