Software - E-Modem Station v0.41.

╔════════════════════════ ═══════════════════ ═══════════════════╗
║  E-Modem Station v0.41  ║
╙─────────────────────────────── ───────────────────────────────╜
(C) Sagittarius

I read the author's EMShelp,and decided to make it more understandable
suitable for ordinary users. So:

- EMS 0.41 consists of at least two files:
"EMS 0.41.B" - EMS itself, and "DRIVER.C" - modem driver;
and also:
"EMSmacro.m" - macros, may be missing;
"EMSphone.p" - phone book, may also be missing;

Versions 0.41 and 0.42 are not compatible with 0.10. Version 0.42 is different
from 0.41 because it works through #3D13, and at 0.41 - turbodrive
ver.

There are no secret files in EMS, but this is to some extent
compensated by the terminal.

- If you have not yet acquired a Kempston Mouse, then manage
  you will have to:
  - SS+Q - move the mouse cursor to the previous one (up)
           button;
  - SS+W - "Fire", if the cursor is on a button,
           then this combination allows you to press it;
  - SS+E - move the mouse cursor to the next one (down)
           button;
  - BREAK - "Cancel",cancel - similar to the right mouse button.

If there is nothing to cancel, then BREAK switches the pages of the main me-
nude (see below).

- The terminal works in almost all modes (letters, numbers, etc.)
- Works in all modes:
  - EDIT (CS+1) - RUS/LAT switching
  - CAPS LOCK (CS+2) - CAPS LOCK (large/small)
  -  I.VID (CS+4) - store/none - write information to log or
                 no.  Log is a kind of CDOS HISTORY,
                 only everything that you or you receive is recorded in the log
                 typed in the terminal which files were transferred
                 given/accepted, all disk errors (if possible)
                 nikali), who called you and much more.
  - EXTEND+digit (all together) - selecting a button in the menu: 1 - first,
                 2 - second... 0-tenth (of course, it is)
  - EXTEND+letter - sending a macro, but the macro can be sent
                 or otherwise, to do this you need to enter "MACROS" and
                 selecting the desired macro using "PREV"/"NEXT",
                 press "SEND". Thisthe good thing is that you don't
                 send the wrong macro by mistake, but it is not
                 We assume if you don't have a mouse - too slow.

- In the main menu:
  - T.VID. (CS+3) - switches the current panel, the left one is yours, and
                 right - BBS.
  - Cursor keys - for moving around the current panel
  - Graphics - mark files
  - Let me remind you that the pages of the main menu are switched to the right
mouse button or "BREAK" key.

═══════════════════════1st page menu════════════════════════

"COPY" - if the current panel is yours, then the transfer of yours is marked-
         files, files are received automatically, either
         All you have to do is pick up the phone (“ON LINE”).
       - if the current panel is BBS, then acceptance of your chosen ones--
         same files.

"ON LINE" - pick up the phone, until you pick up the phone here, you will not
      you can transfer/receive files. If someone calls you
      nit, then on the second call EMS itself will pick up the phone and try
      to determine the number (the Moscow modem does not allow receiving
      sending a number fromATS, and therefore in Moscow EMS numbers are not op-
      thins out). Thus, it can be considered that EMS is constantly
      is in server mode.

"OFF LINE" - hang up, used in manual mode. B
      automatic mode so you can hang the server if
      it does not have the D7 bit configured and does not recognize short
      beeps.  When calling a BBS, the handset is hung up using the key.
      vichy "(end)".  If EMS detects short beeps on the line,
      then he hangs up immediately.

"DRIVE" - change the drive/reread the directory. I remind you that
      the left panel is yours, and the right one can be written in this way -
      grow with BBS.

"DIAL" - call the BBS, deal with this mode yourself, for-
      The only thing is that you can just make a call by entering from the keyboard -
      ry digits of the number and pressing the ENTER key.  The car will start
      dial-up If you try to dial a number after having previously removed
      handset (“ON LINE”), the message “modem is on li-
      ne".  If, when you try to dial, you fall out into the terminal with
      message "Error in line." - that means your modem does not
      bit D7 is configured, how to configure it - read in Proton22.
      You can dial the number using a regular telephone, andthen
      press "ON LINE", in this case the Answer macro (see below)
      is not transmitted, and it is advisable for you to transmit it “manually”
      via the "SEND" key in the "MACROS" menu. Please note that
      EMS does not have a music screensaver (like CDOS), and issues
      requests as Caller ID. Therefore, it is impossible to understand EMS from the phone
      this is either a faulty Caller ID (EMS does not produce long beeps).

"RENAME" - allows you to rename files, by the way, it has a effect here -
      The RUS/LAT switch is active. So soon TR-DOS ru-
      let's sify ;-)

"ERASE" - will delete the marked files, even if you want to delete
      There is only one file - it must be marked.

"MACROS" - macro editor.
 "" - (sysop) - sound signal, for example, the macro "remove the pipes-
        ku" it is reasonable to start with it;
  "" - (end) - using this code the BBS will hang up, by the way, to EMS
        session time is not limited;
  "" - (cls) - upon receiving this code, the BBS will clear the terminal screen
        however, everything will still be saved in the log;
  "PREV"/"NEXT" - scrolling through macros;
EXTEND+letter - go to the desired macro
  "SEND" - send the current macro to the line;
  "FILE" - saving/loading macros, although loading macrosoccurs automatically when EMS is loaded;
  "EXIT" - exit to the main menu.
    Despite the large field, the size of one macro is up to 128 characters.
kov, including Enter.
    Try to end each macro with the Enter key, otherwise
It will be very inconvenient to put them in the terminal.
 Macro "Welcome" - issued to the person who calls you, and the macro
"Answer" - issued by the user calling the BBS. These two poppies
It is advisable to start with the “screen clearing” code, for example:

──────────Macros ANSWER──────── ──────────Macros WELCOME────────

Calling you (095) 975-9220 You have reached J-BBS!
                                (095)975-9220, 22:00 - 08:00
Do not upload files with 0 length,
                                otherwise you will hang yourself. :-)

                                ────────────────────────────────

═══════════════════════2nd page menu════════════════════════

"RUN FILE" - does not work.
"VIEW FILE" - reading texts.
"VIEW TEXT"  - also reading texts, but "VIEW FILE" adds
         strings (if more than 64 characters), but "VIEW TEXT" is not, and
         you will have to use "LEFT"/"RIGHT".
"VIEW SCR" - view pictures, any key except SPACE cyclically
         change inversion, on/off color, brightness.
"VIEW LOG" - view log.
"SAVE LOG" - write the log to disk under the name EMSlogXX.C. Autonu-
         meration of this file.
"CLEAR LOG" - clearing log memory.
"SETUP" - does not work.

═══════════════════════3rd page menu════════════════════════

"CLS SCR" - clearing your terminal screen.
"(sysop)"- send a sound signal to the subscriber if he has amplified
         If AY is turned off, then it is useless. If you want
         communicate with the sysop in the terminal, then with this key you can
         attract the sysop's attention to the computer.
"(end)" - end the communication session and hang up. When bad
         connection press several times, or first reduce the speed
         grow.
"(cls)" - clearing the subscriber's terminal screen.

═══════════════════════4thmenu page════════════════════════

"600","1800","2400"  - select your transmission speed. Speed s
which you will accept, accordingly, is set by
your subscriber. You and your subscriber can set different speeds
grow. In the terminal, try to type at speed "600".