Printer - The instructions are intended only for the MS-6312m "RADIUM" printer.

╔════════════════════════ ═══════════════════ ═══════════════════╗
║  Printer.            ║
╙─────────────────────────────── ───────────────────────────────╜
(C) EVP-SOFT

 These instructions are intended only for the printer MS-6312m
"RADIUM". Commands whose assignments are preceded by "+" on others
printers have a different purpose and therefore can be inserted
only in text intended for printing on the MS-6312m printer
"RADIUM". Commands whose assignments are preceded by "(+)" other
Some printers will be processed differently, so they can also be
insert only into text intended for printing on a printer
MS-6312m "RADIUM". 1 inch = 2.54 mm. Line width 6 inches.

HEX DEC FUNCTION
───────────┴─────────────────┴─ ────────────────────────────────
1B,0F 027,015 + Enabling the compressed mode
                              chati, 18 characters per inch.  Cancel
                              is activated when the ESC code is received.
07 007 The printer will beep.
08 008 Print position shifts to the left
                              by one sign, which allows, in
                              in particular, print the sign "unequal"
                              nsto" - for this you need to enter "=",
                              then code #08 and "/".
09 009 Horizontal tabulation. Position
                              printing is brought to the next stage
                              position installed horizontally
                              noah tabulation.
0A 010 Line feed.
0C 012 Page translation.
0D 013 Carriage return.
0E 014 + RUS. Transition to KOI-7N1 from KOI-7N0
                              or KOI-7 N0/1
0F 015 + LAT. Transition to KOI-7N0 from KOI-7N1or KOI-7 N0/1
11 017 + Printer selection
13 019 + Cancel printer selection
18 024 Clearing the entire print buffer.
7F 127 Removing the last print from the buffer
                              text sign on controls
                              codes have no effect.
1B,3C 027,060 Unidirectional printing (left to -
                              right), only applies to one
                              line.
1B,55,n 027,085,n Unidirectional printing (left to -
                              right), n=1 - on, n=0 - off.
1B,43,00,n 027,067,000,n The page length is set to
                              inches, where n has a value from 1
                              until 22.
1B,2D,n 027,045,n Underline, n=1 - on,n=0 off
1B,30 027,048 Select 1/8 inch spacing
                              I'm waiting for lines (8 lines per inch).
1B,31 027,049 + Select 7/96(1/13.7) inch int.
                              torn between the lines.
1B,32 027,050 Select 1/6 inch interval
                              I'm waiting for lines (6 lines per inch).
1B,33,n 027,051,n (+)Select n/288 inch interval
                              between the boundaries(!) of lines.
1B,40 027,064 RESET command. When you turn on the pi-
                              tanning is performed automatically.
1B,41,n 027,065,n (+)Select n/96 inch interval
                              between the boundaries(!) of lines.
1B,4A,n 027,074,n (+)Paper feed forward n/288 inch
                              yama.
1B,6C,n 027,108,n The value n determines the valueindent from the left edge of the paper in
                              symbols.
1B,51,n 027,081,n The value n determines the value
                              indentation from the right edge of the paper in
                              symbols.
1B,2A,m,nn 027,042,m,nn Enables graphic mode
                              images. Descriptions of all modes
                              mov graphic image at-
                              are listed in Table 1.
1B,5E,m,nn 027,094,m,nn + The 9-needle mode is turned on
                              graphics.
1B,6A,n 027,106,n (+)Paper feed back n/288 inch
                              ma.
1B,41,n 027,065,n The page length is set to
                              lines.
1B,44,nn 027,068,nn Installing a horizontal tab
                              tions. Installs up to 32 horizontal
                              zone tabulations, they introduce-
                              equals n1 n2 n3, etc. (in the rangezone 1-255) code 0("NUL") in ka-
                              as a limiter.   Values
                              must be specified in increasing
                              I'm fine. When n1=0 reset-
                              All tabulations.  After completing
                              RESET command (ESC @) value
                              The number of all tabs is 8.
1B,45 027,069 Selecting a highlighted font (Bold).
1B,46 027,070 Cancels the selected font.
1B,47 027,071 Double strike selection, each
                              the line is printed twice.
1B,48 027,072 Cancel the "double strike".
1B,4E,n 027,078,n Selecting passage through perforation,
                              the variable n is the number st-
                              rock skipped between the last
                              line printed on one
                              page and the first line on the next
                              next page. Used whenprinting on a roll.
1B,4F 027,079 Cancel passage through perforation.
1B,50 027,080 Enable "Pica" mode.  10 sim-
                              oxen in inches.
1B,4D 027,077 Enable the "Elite" mode. 12 sim-
                              oxen in inches.
1B,57,n 027,087,n Double width, n=1 - on, n=0 -
                              - off
1B,77,n 027,119,n Double width, n=1 - on, n=0 -
                              - off
1B,4B,nn 027,075,nn Graphics mode 0.
1B,4C,nn 027,076,nn Graphic mode 1.
1B,59,nn 027,089,nn Graphics mode 2.
1B,5A,nn 027,090,nn Graphics mode 3.
1B,52,n 027,082,n + Select character encoding:
                               n=0 - KOI-7 N0n=1 - KOI-7 N1
                               n=2 - KOI-7 N0/1
                               n=3 - Bulgaria
                               n=4 - PC866 (+ Bulgaria)
1B,53,n 027,083,n Index selection:
                               n=0 - superscript
                               n=1 - subscript
1B,54 027,084 Cancel printing of indexes.
1B,78,n 027,120,n Selecting print mode:
                               n=0 - Draft - draft print with
                              low quality and low consumption
                              house of ink.
                               n=1 - NLQ - High-quality printing.


 Table 1. Description of graphic image modes
┌─────┬──────── ─┬──────────────┬────────────┐
│mode│density│on code │number of points│
│ m │ │ │ per inch │
├─────┼─────────┼───── ─────────┼────────────┤
│ 0 │x1 │ESC K; ESC * 0│80 │
│ 1 │х2 │ESC L; ESC * 1│160 │
│ 2 │х2 │ESC Y; ESC * 2│160 │
│ 3 │х4 │ESC Z;        │320 │
│ 4 │х1.2 │ESC * 4 │96 │
│+ 5 │proportional │ESC * 5│~96         │
│  6  │х1.5     │ESC * 6       │120         │
│  7  │х2       │ESC * 7       │160         │
└─────┴─────────┴──────────────┴────────────┘