=========================================================SELAY SAM=====
KEYPAD
I ate delicious porridge and will now treat you about cables
for your keyboards. It’s night over the city right now, but it doesn’t matter.
well, someone will probably say - why talk about them, and
so everything is clear - I took it and connected it. that's how it is, but here it is
Often there is one or even several problems!
well, firstly, it's the cable itself. we need him to be there
quite flexible, ale - soft... well, judge for yourself -
such an unbending cord sticks out of the keyboard and you can’t help it
you won't bend...
well, just like your monster!
and we also need it to have 13 wires, and if you
do you want to display reset on the keyboard - loaf, yes magic
more,then this is finally 16...
well, spekman, let's pick something up right now
suitable...
someone probably immediately thought about a ribbon cable. well
it will work well, but look at it
It’s kind of crappy, I don’t like it at all. no, well
it’s true - the crap is so tired of the keyboard... it’s too painful
wide receive. and there is no screen, and if with gnd
alternate then finally get the horror (well, you got me
you understand...). yes, it’s okay if it’s soft, but after all
There are such hard wires, but it’s generally crap...
hang current on it if.
stop where you ran, I'm not out of malice, everything's fine,
The main thing is that you like him yourself! hang always
you will succeed!
the wire from the dandy joes immediately disappears, from the megadrive
too... someone might think that it’s from the pissing keyboard
you can tear it off - no, there seem to be five of them along the way
affairs. Not so from a mouse either.
damn it, where can I pick it out from?
what is that wire that runs to the printer, it’s thick
so long. and soft. a at the ends there are 25-pin and
36-pin connectors. we disassemble the connector, and there...
treasure.
oh, it seemed like there was some wiring here! just a second, nada
protect... in general... 19(!) wires plus another screen
from foil. she's there with the film cnpeccobaha, so no
Trescaezza. As a rule, these cables are about two long
meters. they call it lpt and something else. here he is
ideal for Specov keyboard, and not very
thick (totalabout five mm).
and hanging on it is much easier.
by the way, they can be as much as five meters long. but I wouldn't tell you
I advised you to attach one like this, you never know what will happen
maybe... suddenly the pisishnik from whom you stole it to you
I'll be surprised that you have such a cable for the keyboard
awesome! Well, I’ll come up with some kind of left-wing excuse then,
like there, it was two meters, and you just stretched it
yes. He'll probably immediately run to stretch his own! a kada
will break that upset. and will fall sadly to fight.
The optimal length of the keyboard cable is two meters.
if the spec is on your table, then this length is quite
That’s enough, and if it’s on the floor or somewhere else, then even more so!
but if it’s necessary, then you can make it three meters, no matter
nothing terrible happened, because there is a screen.
butFor example, I have a two-meter cable without a screen,
and nothing - it’s been working for three years now and there’s nothing wrong with the spec
doing. I just read in the instructions that if the cable
if the keyboard is longer than one meter, then it will be affected by
electromagnetic interference (not to be confused with vodka) from
different sources.
and they can damage the input stages of the board
working for her. a shielded wire, if that’s all
it will be ok! will protect.
Right now we even have a new LPT cable for two meters
costs about 50 rubles in total (made in China), and also
you will be left with a 25-pin connector (it costs 15 separately
rubles). In general, it’s finally profitable!
the current color of this cable will most likely be gray. a
Most of our keyboards are black! therefore also
There is an option - we are producing cable in Russia right now
one that just suits us, in itfourteen
wires and plus are the same as in the printer cable
screen. copper wiring, multi-colored, multi-core.
beautiful.
...and it's very soft! and they are all in a black shell.
it has a name, but I don’t remember it, look for these
signs.
For us it costs 24 rubles / (kilo) meter, normally shorter.
There is not enough wiring for magic, but there will be a reset! I
I bought one for myself, two meters, for the Pentagon. and the elephant too,
They’ve already given it to him - it’s great to look at!
I have already installed it for myself too, right now I am typing text on it,
through him. Great.
ask in city stores. Butif so, then it’s possible
do something like this myself, which is what I've been doing for years
three ago. I really wanted a wire for the keyboard
two-meter and not tape.
I took two meters of cambric (Pasha gave), wiring
sixteen single-core pieces (picked them out of
thick cable, a piece of which Sergey gave me
Ivanovich from the State Statistics Committee), and at the insistence of the same Pasha
the cambric was placed in a bottle with solvent 646! by type
The cambric will lie there for about twenty minutes and it’s awesome
expand, all the wiring will fit into it at once. without
bonpocoff. and then - later - squeeze it back, more
It will become thinner than it was!
cool and short.
well, I shoved them there and left them widening
twenty minutes. in the kitchen. I come running - there’s something in the bottle
white floats. the flakes are so big. basically cambric
everything fell apart. I caught all the pieces and threw them away. WellI probably held it too much - I thought.
took another cambric from Pasha and stuck it in again. by ten
minutes. Well, I look - it seems like he has become fatter! I get him
quickly, I try to put the wires in there - and it starts to tear
along the seam, shorter lengthwise. it's like glued together or something
sort of. Well, when it’s without a solvent, you can’t see anything,
and after processing - this seam is almost visible.
I don’t know if all cambrics are like this or if I just have one.
well then I took two more meters (he said no more
will give), took a couple of meters of nylon rope and tied it
end (not your own, of course, but a rope) to the wiring with
one end.
well, I tied them into a harness like I did. this is to put them in cambric
this one could be dragged through this very
ropes... tied the end of the rope to the table leg. and
became neatpull the cambric. wiring slowly
They began to crawl into it. they're somewhere in the middle
started to move too slowly, and several times
the rope even broke.
I was already thinking and didn’t get anything. but at some point
When I tried, wiring appeared from the other end of the cambric.
it worked!!!
the main thing is to push them into the cambric smoothly, gradually,
no rush, otherwise the rope will come off and come undone
start all over again.
instead of wiring, you can use wire, then
The ends of the wires can be soldered to it. well, if you
If you use mgtf, then you can probably use them in thinner ones
drive the cambric (especially if the mgtf itself is thin). cool
there will be!
I recommend using the connector15-pin, canon,
and here is how the signals are located on the extend keyboard: for you
I scouted everything out and didn’t sleep at night! nepebephu with her buttons
down, with trains up (so that there are eight on the left
tracks):
and this is how the signals will be located, as you can see, they
out of order:
+------------------------------++---------------------+
| ||
+------------------------------++---------------------+
this should have been written in the last issue, but oh well!
connect, write as received! good luck, keyboard player!
Share your thoughts about the article