Interview with our guest - So, today our guest is PatSoft of Reflection group.

 ╔═══════════════════ ═══════════════════╗
  ║Article: Interview with our guest;      ║
  ║Text: Vorozhkin Alexander.           ║
  ╚═══════════════════ ═══════════════════╝

 So, today our guest is PatSoft of
  Reflection group. First, a brief
  information about him: real name Paterilo
  Maxim, born in 1979, lives in
  Kharkov, interested in codes from the middle
  1995. Our interview will be structured
  on the questions that the rep will ask
  datsiya and the answers that will present us
  guest!

 QUESTION:01.

When did you first learn about assembly language?
  and made their first attempt at writing
  own subroutine?


   I learned about assembler at the end of 1994.
  At this time I got a monitor -
  disassembler ADM 7.08. Currently
  I had a desire to switch from BASIC
  to a more perfect language. I decided to
  get started with the ADM 7.08 program. After
  some time I discovered the di- mode
  assembly, after selecting this re-
  While pressing, I discovered commands that I didn’t understand.
  Subsequently I found out that these were commandos
  assembler and I decided to purchase op-
  Introduction to assembler commands. After reading
  I don't know anything about this book
  understood, after which I decided to deal with
  some kindprogram. The best way to do this is
  the SUPER CODE program was suitable. And I
  I decided to look at the text of the subroutine
  UP-SCROLL.I figured out this procedure
  in 30 minutes. After that I got something...
  It’s clear. Later I decided to look and
  at the same time deal with other procedures
  SUPER CODE. A month later I purchased an assem-
  Blair TASM 2.0, which I purchased on ba-
  dawn, and I decided to write my first pro-
  procedure for scrolling text.After an hour
  routine work I completely finished it
  write and decided to test it to work
  ability, but I didn’t have time to blink my eyes
  Here's how he successfully hung. I wrote it
  three more times, but with the same success: he
  again hanging hopelessly. After that I re-
  I decided not to deal with them anymore.
   Two months later I got a disk
  with such musical demonstrations,
  such as SATISFACTION,ASSORTY,GLUM,
  MEGADRINK,RELAXATION,MEGASMOCK.After watching
  them, I had a blast, especially from SATIS-
  FACTION MEGADEMO and I got the same
  wanting to write my own DEMO, and I
  downloaded TASM 2.0 again and decided to write
  SCROLL again to the line, which after a lot
  I managed to write numerical attempts
  it. Characters were printed in it
  via RST 16, which I didn’t really like,
  since the symbol output was taken from the ROM.
  after a month of work I did a normal job
  the scroller procedure I use
  andto this day.

    QUESTION:02.

What was the name of your first demo and what
  was it used?


   I called my first DEMO PATDEMO, so
  How did I come up with a pseudonym at that time?
  PATSOFT.My only effects
  there were an attribute scroller and a scroller in
  line, as well as microprocedures: attribute-
  analyzer and flashing to the music. So-
  I was provided with the same graphics by IMPETUS LED.
  By the way, at this time a group was formed
  REFLECTION.

 QUESTION:03.

 What is your favorite DEMO and why?

 Most of all I like these DEMOs:
  SATISFACTION, because it was one of the most
  the first cool demos at that time.
  UNREAL, it's pretty well thought out
  the idea of moving from one part to another
  without direct impact on
  keyboard, as well as good musical
  accompaniment.
   DEM'ok, which I don't like, very ma-
  lo.

 QUESTION:04.

 Have you tried to write games?

 I tried, but due to the volume of work I
  didn't finish it.

 QUESTION:05.

 Were you going to switch to AMIG or
  IBM?

 First Iwas going to switch to IBM, but
  due to lack of finances, I was unable to purchase
  I'm growing up with IBM and now I'm thinking about purchasing
  Retenia AMIGA 1200.

  QUESTION:06.

 Have you ripped out someone's subroutines. If
  yes - whose, if not - then why?

 Surely any novice programmer
  used other people's routines and I didn't
  exception. This torn effect was
  attribute scroller which I use
  shaft in PATDEMO 1. I borrowed it from
  KLAV from HELP to SUPER SONIC.

 QUESTION:07

 What can you say about the scroller by
  sinusoid?

 I think my procedure will be one
  one of the fastest, precise clock times
  I can’t say because he hasn’t yet
  written to the end.

 P.S. Taking this opportunity, I would like to
       will be sent to the editors of ZX-FORMATA with notice
       looking towards TASM 4.0, which
       improved SPARKER. When trans-
       assembly text translation and
       meeting of the DEFS directive with successive
       of two or more bytes of assemblies
       Blair resets. I also wanted
       I would like to wish you all the best in a hundred
       to the editors of FAULTLESS MAGAZINE!!!