City #07
28 марта 1999 |
|
Iron - how to connect to your komp'yute Kempston Mouse Interface.
Saransk. Republic of Mordovia Free computer magazine for ZX SPECTRUM (Hm. .. Free? And do not expect) # 7 of 29.03.99g -------------------------------------------------- PLANET SHELEZYAKA -------------------------------------------------- Today I'll show you how to connect to your computer Kempston Mouse Interface, described in the article (C) V. stalls "ZX Spectrum and mouse from the 20 th spectrophone. This will require a maximum of K555 (1533) LP8, three resistor 1 kohm and a 560 Ohm. Firstly the scheme of spectrophone need to add another small piece: +5 B LP8 / IORGCE Signals / BCS, ° ° / XCS, / YCS taken March 2 with chips DD8 / BCS D ° (LP8) Kempston Mo A use Interface. Whitefish ° ° E signal / IORGCE in some toryh computers for example, SCORPION, KAY, already implemented, June 5th and if you PENTA / XCS D ° GON, we will have 4 Make another small ° ° E Lyonka revision. Track on board computer running from December 11 feet 20 processors / YCS D (signal / IORQ), it is necessary 13 necessary to cut and ° E gap solder resistor torus 560 Ohm. Signal up resistor remains unchanged / IORQ, but after resistor, it will be / IORGCE. Can verify this by any means, for example, tasted signals language. I assure you, will pinch in different ways. Making sure that you actually signal appeared / IORGCE, safely connect it to the proposed shemke. Second, you need to do this through a resistor com apply +5 V to pins RIGHT B, LEFT B, MIDDLE B. Now connect to your interface passive mouse or IBM-active-native, modified (or rather vypotroshennuyu), as indicated in the ZX FORMAT # 5 and boldly work. Personally, I podlyuchal mouse so that's a way to PENTAGONu and SCORPIONu and nothing happened, everything works. In the newspaper there is a small testik, checking this device. If needed, call ...
Other articles:
Similar articles:
В этот день... 21 November