15.03.99, Cherepovets
Hello. I would like to get information about KAY boards along these lines:
- Prices (plus peripherals);
- A brief description;
- Compatibility with the Scorpion ZS-256.
Regarding the third point: I had a Scorpion for 5 years, but disaster struck: it “died.” Since, as I later found out, it was pirated, I couldn’t get it repaired by “Scorpion,” and their boards are quite expensive now. So I’m very interested in KAY’s compatibility with the Scorpion, both in software and in technical (hardware) terms—that is, port #1FFD, compatibility with ProfPZU and simply the ROM from a Scorpy, since I’ve grown very accustomed to the shadow monitor-debugger and can’t do without it. I’d also like to know whether KAY is compatible with Scorpy peripherals (General Sound, GMX, etc.).
I’m sending an envelope with my return address and very much hope for a quick reply.
Respectfully,
Hello, N!
- Regarding KAY boards:
1.1. Prices: see price list.
1.2. Brief description: see advertisement.
1.3. Compatibility with the Scorpion ZS-256.
KAY and Scorpion, despite their outward similarities, are different machines. Although compared to other Spectrum clones, they are architecturally the closest to each other. They are fully compatible at the Spectrum-128 architecture level, and partially compatible at the 256 KB level (the 256K RAM expansion control bit is the same, but some OTHER bits perform DIFFERENT functions). There is no compatibility with the shadow monitor or SMUC, since they are intended to be installed together. The way this was done in the Scorp was deemed unpromising in 1996–97, and KAY developed along a DIFFERENT ideological, conceptual and, of course, circuit-design path. This applies fully to GMX as well. The problems Scorpion could not solve (or solved only partially) have been solved COMPLETELY in KAY, at SUBSTANTIALLY lower cost and, accordingly, price. The “soldering iron,” inevitable when expanding the Scorp, is entirely eliminated in KAYs. Your machine probably broke down precisely as a result of the “soldering iron”—that is, unprofessional interference with the computer. The “pirated” origin of your machine is merely an excuse to reject the warranty claim as an unprofitable operation. Had the machines been genuine, the result would have been the same. In ProfPZU, the only professional thing is the approach used to separate money from the population. ProfPZU has nothing else to do with professionalism. In KAY, the functions performed by ProfPZU are handled by the ISDOS OS (operating system), which resides not in ROM, but in 1 MB of RAM (or on a hard drive) (KAY-1024). It’s a great shame that you threw so much money away, only to end up “at a broken trough.” But that’s a question for Scorpion, not for Nemo Inc.
As for the debugger controller, it really is justified up to V.2.95—no higher. At present, KAY-1024 has no shadow monitor, but work is currently underway to install the STS monitor in KAY-1024.
KAY is compatible with STANDARD EXPANSIONS on the Nemo-Bus, manufactured by independent companies (for example, GS, Kempston MOUSE, XTR modem). GMX is NOT a BUS EXPANSION. If you try to install it in KAY, then,
Article: 15.03.99, Cherepovets
Fragment 2/2.
You’ll most likely end up empty-handed, just as you are now, because this is a pure “SOLDERING IRON” job. Pay attention to the wording in the ad: “Any additional soldering/resoldering releases the manufacturer (i.e. the firm (c) Nemo) from ANY AND ALL OBLIGATIONS.” Don’t stick your hands where your head can’t fit. Nobody is obliged to—and nobody will—take a loss fixing the consequences of UNPROFESSIONAL tampering with the equipment. IT COSTS A LOT. Ask Scorpion to install the GMX in your board and send the whole thing to you assembled and working, with a warranty. Don’t forget to ask the price.
As a compromise, I can offer you a Scorp-256 board (not the turbo version—turbo boards are buggy, and selling them is asking for trouble) with a shadower no newer than V2.95 (see item 1.7 in the price list). Naturally, it’ll be used, since getting into PIRATE manufacturing is a bad idea—and not profitable either. KAY is more technologically advanced.
╔═════════════════════════════════════════════════════════════╗
║ ° ° ° ║
╚═════════════════════════════════════════════════════════════╝
Share your thoughts about the article