Letters — KAY-256/Turbo+ order and KAY-1024/Turbo pricing

NemoFAQ #02

02.02.99, Novy Vasyugan

Hello. I would like to purchase from your company: a KAY-256/Turbo+ motherboard (description + circuit diagram), a floppy disk controller (if it isn’t on the motherboard) + a 5.25'' floppy drive (used is fine), and a system disk with IS-DOS. In short, I want to build a computer. I have a power supply and keyboard. Actually, I’d buy a complete computer if it cost no more than 1,200 rubles.

If possible, please fill my order cash on delivery (I don’t want to waste 2–3 months on pointless correspondence). If not, please send me your terms. I’d also like to get complete information about KAY and the other “hardware” you manufacture or plan to manufacture. Can I buy kits from you to assemble a KAY myself? I know several people who would like to have a computer, but money is tight.


Dear N!

  1. KAY-256-TURBO boards were discontinued a year ago. KAY-1024/Turbo boards are now being manufactured.

  2. The price of a complete computer (as of today, 02.02.99) is 650 × 2.2 = 1,430 rubles. Within the next month, the price will probably pass the 1,500-ruble mark. Here’s why. 650 rubles is the pre-August price. Roughly 1/3 of the price is in dollars (bucks) and 2/3 in rubles. Let’s calculate the price change, taking inflation and the devaluation of the ruble into account: inflation is about 100%, and devaluation is (22.7/6.5 − 1) × 100% = 249%. In total:

    650 rubles × 1/3 × (1 + 2.49) = 756 rubles
    650 rubles × 2/3 × (1 + 1.00) = 867 rubles / 1,623 rubles

    It’s easy to see that the current price is 13% too low: 1,623/1,430 = 13%.

  3. We don’t sell cash on delivery. In that case the price would be 1.5 times higher. I doubt you have that kind of money, or that you’d be willing to pay it. Judging by the fact that you didn’t enclose a stamped envelope for the reply, money really is tight.

  4. There simply isn’t any complete information about KAY available to the public. We have internal company documentation. Quite a lot of material about the KAY computer SERIES is available in the electronic magazines ZX-F, KrNew's, and ZX-club (St. Petersburg, Krasnodar, and Barnaul, respectively). The conceptual design of the KAY series is in the magazine “Radio Amateur” (Minsk, 1993); it also describes the first, basic model, v 1.0. The model currently in production is v 1.5 KAY-1024.

  5. Kits (yes, plural!) are available; see ZX-F No. 7 (or No. 8? I don’t remember now), “Technology Export.” This only makes sense if you plan to make motherboards regularly. It’s not 1992 anymore, and quality manufacturing requires a certain level of production standards—namely, a reliable supply of components. Can you get every chip in the 1533 series? What about a Z80C0010? Or a 27C512 with an access time of less than 15 ns?

The machines actually run at 7.0 MHz (effective frequency 6.4 MHz), so the requirements for components are quite strict. If you stuff the boards with whatever you can find, like in 1992, you’ll end up with glitchy computers that are impossible to work on. In other words, manufacturing now requires professional work; these are no longer amateur projects.

(c)Nemo.

╔══════════════════════════════════════════════════════════════╗
║                          °  °  °                             ║
╚══════════════════════════════════════════════════════════════╝

Share your thoughts about the article