DO IT YOURSELF - SATCH SA LED! I love LEDs. With them, life becomes beautiful and colorful.

1===========================DELAY SAM=====
                                                        
                                         [CATCH DA LED!]
I love LEDs. with them life becomes wonderful
and colorful. Finally, this is a wonderful invention. in
first, because it consumes almost nothing, and in
secondly, it burns for a very long time, I remember once being interested
from a specialist, no matter how fast the diode may be on, why not
said that for a hundred years without a break he definitely should
plow.                                                 
                                                        
just think, guys, it's been worth a hundred years of speck, keyboard
It's all worn out, the disk drive too, the nests are all worn out from old age
cracked, and in front of it the diode is on, and next to it
signed "power"!                                      
                                                        
well, do you like it?                                       
                                                        
everyone is probably on fire! by the way, if anyone
doesn’t know, then a regular diode should be connected to 5vthrough
470 ohm clip. take the rubber with the smallest power,
0.125W, of course it will heat up on the iron, but
There will be no charring, I’ve done this for a long time.     
                                                        
a for 12v take a rezik somewhere in the kilo-ohm range. there are LEDs
different, round, five and three millimeters,
rectangular and round healthy ones, about a centimeter
diameter, I don’t have many of those.                     
                                                        
they come in four colors - red, green, yellow, and
blue (non-standard), no other colors available yet,
although I recently found an orange one in the store, just like
orange, I’m seeing it for the first time! a costs as usual!            
                                                        
there he is looking at me right now. so handsome!             
                                                        
they come in normal and increased brightness, by the way, in
laser pointers, if anyone doesn’t know, it’s also worth
LED, really fucking bright, and a lens for light
focus.                                           
I bought one and installed it on an amplifier, and then another
end of the room everything is illuminated with red light, and if
shine it on the ceiling, you can see a red circle on it.  
                                                        
what technology has come to!                                  
                                                        
well, different diodes cost differently, from one to
half to fifty rubles, for one and a half you will buy
our five-millimeter one, its brightness is normal, but also
nothing.   for about two you can buy a bourgeois one
three-millimeter, the brightness is the same, they are bigger for me
I like everything.                                         
                                                        
well, for 40-50 rubles you can buy an awesomely bright one,
so bright that if you look at it, then 
“dots” remain in the eyes, like a light bulb
look.                                             
                                                        
they also come in two colors and flashing, but what are they for?
surplus...                                             
                                                        
okay, yesterday I thought that I could connect a diode
to any almost Speck signal, this will not work
no benefit, but it will be beautiful!                     
                                                        
how to do it, I think it’s clear, it’s best for this purpose
A three-millimeter diode seems to suit me, and it
He doesn't eat much and be careful, and there's a hole for it
easy to drill.                                      
                                                        
In general, take a 1 kilo-ohm resistor, solder it to the diode,
then solder the wiring, connect one to the power supply or
plus power, and the second, start carefully connecting to
queues at different feet of different mikruhs!                   
                                                        
don't be afraid, this won't break the Spectrum, I'm telling you!     
                                                        
whenever you find somethinginteresting, remember and look for more
whatever.                                                
                     
I used to have a flash connected to the signal, it blinked
It’s very beautiful, but the flash itself works from this
stopped, the rezik was just at three hundred ohms, you can go to VG93
connect, or better yet, search through the drive connector,
current at this time you need to load something so that on it
there were different signals, I liked the "side" signal, to
Yesterday I connected a diode to it.                          
                                                        
moreover, after accessing the drive, it either lights up or doesn’t
lights up, depending on which side (0/1) it ended
disk access.  and there is no need to solder anything to the board,
You can solder it directly to the connector on the drive cable! 
                                 
in short, there is room for imagination!!!                     
                                                        
                                                        
turn on the spec, and something on it either lights up or blinks,
In general, there is something to see, it’s useless, but very
beautiful!                                   
                     
well, guys, let's get to work...