==========================================================HI-TECH=====
TWO HOLES
today I want to tell you how you can create it in the case
which - the thread of the hole (different). well there, for example,
you attached some gadget to the Spectrum, and to it
attached a switch, a button or a toggle switch, and what’s it
attach? he can, of course, lie next to him, or
glued to the side with tape, but for those who don’t like it
This high-tech release will help.
he who knows everything - let him not read! and who doesn’t know - me
I'll help. and who knows - maybe I’m something new
came up with it, at least look through it!
about first
[1.round holes]
easierAll you have to do is drill it (with a drill). drills
come in any diameter, from 0.1 mm to... well, I don’t know, to
exactly a centimeter (and no more is needed). they also
divided into those made of wood or metal. but if
Your body is made of plastic, then any will do. by appearance
they are the same, but they are rarely found on wood, so
don't worry. typical hand-held electric drill drills up to
centimeter, as a rule, clamps. first freeze the bullshit
for which you need to make a hole (with a ruler, for example),
mark with a thread the place where it needs to be made (with a felt-tip pen
for example), and then select a drill.
if the case is metal, then in the place where you will
drill with something, make a dent, a nail for example,
place it and lightly hit it with something heavy. if
it cannot be done, then the drill can cbexatb. but a hole
drilled. current not where it is necessary, but where it is not necessary.
just make sure that the whole body doesn’t bend if it
stands on legs and you make a hole in the bottom, then you can
(bottom) bend and the body will then be shattered! so
put something underneath. put the drill on and
press the “let’s drill” button (well, maybe it won’t
so-called, but something like that).
but what to do if you don’t have a drill, and your neighbor
won't let you drill for half an hour? (because you are constantly
You're sawing something in the entrance and you don't clean up the sawdust...
you throw it onto his mat and never say hello). in
the cheapest one in the store is still expensive and you can buy it
(therefore) - no way?
I have a real drill, it’s a classmate of a year for me
sold it four years ago for 50 rubles (I just stole it from
someone). good drill, almost new, still
I'm happy!
well, then you can do it like this: (the artisanal method,
primitive, but accessible to everyone!) works on current
plastic cases...
take a thick nail, pliers, your Spectrum and
you take the whole thing to the kitchen. take a big saucepanbreak the Spectrum into small pieces and throw it there.
Now add water and cook over low heat until
half-cooked... although no, don’t take the pan, it’s better
pinch the nails with pliers and heat it on the stove,
as they say, “red hot”. I don’t know how to get it if
electric stove - haven’t tried it, but on a gas one -
it will be a great ride!
now quickly call a friend of yours and ask him
hold the carnation. pisishnik will be burned again and
again, but taking a carnation will still be torture
(wrinkling his forehead), not understanding what’s going on here. this is very
Everything will be funny to watch, I promise you! oh well, here you go
When you've had enough of playing with the pussy, it's time to brazza for the body, oh,
that is, let's get to work! heat the clove again and poke... no,
not in the pussy, but in the place on the body where you want
so that a hole appears. acrid smoke will immediately rise, but you won’t
retreat, and move your nail (?) in the body.
get a nail (pervert). and then she appeared.
now you are the happy owner of a small crooked hole.
now take a small knife and inserthim into the hole. and
start rotating it carefully, gradually expanding it.
regularly interrupt the operation and try on your toggle switch
(or whatever you put there) to the hole. That's it!
perhaps such a hole will not be particularly smooth - but this
how you pick with your knife!
and now we'll talk about
[2.free-form holes.]
well, for example, attach a socket for ega to the case
monitor, or for a printer. or finally - for a 3.5 floppy drive
make a gap in the front!
what to do? I suggest doing it this way: attach the nest
(or fdd) from the outside to the body and draw something around it
circle so that its outline remains on the body. not yet
I recommend a felt-tip pen - it will be erased immediately, better than any
marker. Well, half the battle is done.
Now you can (if possible, i.e. there’s nothing in the case
does not interfere with sawing with a jigsaw), drill / nail
make a hole in this outline (preferably in the middle),
put a jigsaw file into it, clamp it back and
cut straight along this line. (this is for plastic
housings) and the hole for the socket is ready. with the help of such
techniques you can make holes of absolutely any shape -
at least triangular!
but if the case is metal, then we drilled so much
holes as many as you can, the main thing is to go beyond the contour
which you painted didn’t come out, then all the metal that
If you can, dig it out of this area with pliers.
in general the point is to have as much metal as possible
remove using a drill and nippers. and then take it
a file of suitable size and carefully and fiercely
file away the remnants of the metal you shredded. only
make sure you don’t overdo it and don’t drink too much! first
you can sharpen with a large file, and when it’s not enough
stay - then small, constantly stop and
check how things are going there. Herethe quality of the hole depends
current from you, train, gradually you will receive
It's getting better and better!
in this way (using a drill, wire cutters and file) I
in this way (using a drill, wire cutters and file) I
in the summer I made three holes in the piece of iron for nests (9.15 and
25 nuhoboe). They turned out pretty smooth, I like them!
good luck to you, wild spekk-man, in hole-building!!!
Share your thoughts about the article