DO SAM - Somehow last year I began to feel overwhelmed by the fact that the beautiful Polish power supply from my Spec was heating up quite well and I began to be overwhelmed by an uncontrollable desire to put a cooler on it...

=========================================================DELAY SAM=====
                                                        
 # #                                                  
 ## somehow last year I became nponupatb from the fact that
that the beautiful Polish power supply from my Speck is not bad
xo is warming up and I began to burst with uncontrollable desire
put a cooler on it...                             
                                                        
 # #                                                  
                              
                                                        
 For those who don't know: a cooler is a propeller in
frame, which, when voltage is applied to it (usually
only 12 volts) begins to spin very, very strongly and emits
create a directed stream of air. PCs poke people like this
pieces almost everywhere: on the power supply, on the processor,
for video cards, for sound systems, for the fuck... No, it seems like there for now
they don't put it. (; And they need all this to cool
pC'south,which would not have lived even 5 seconds without coolers!   
 Cooler - (from English) refrigerator, cooler.         
                                                        
   Then the question arose: where to get this refrigerator?
nickname? The answer instantly popped into my head: in a local store.
no!                                                     
 And so, somehow passing by one PC store -
I decided to go there, but left almost immediately, because... coolers
Power supplies there cost from 1 So rubles!!! Well, by-
clear, 15o rub. I didn’t spend money on some kind of propeller.
I bought a normal cooler for 5o rubles, although I had money
it’s a pity... I bought it from one PC’s dealer who
studied with us. His name was Pasha, he could get all sorts of things
damn rubbish (new and used) cheap. (: But
this is not so important, the main thing is that the goal was achieved!    
 I instantly connected the Cooler to Speck and it became
blow!  Of course, he did not blow silently, although he stood on the para-
bosom, which significantly reduced the noise. And now the cooler got me into
The man raised his voice with his noise. Referring to the fact that it is heating up
the power supply is not that strong and quite long beforethis
worked without a cooler, I turned off the cooler and now no
I almost regret it, because... absence of noise there is rulezz!      
 After this, the cooler turned into a useless wallowing
whole thing.  After thinking, I decided that 5o rub. should not be lost
give it in vain and made a cheerful interior decoration out of the cooler,
which blows, spreading strips of polyethylene over cool
jets of air.                                         
   If you are also eager to create something unusual, then
forward!!!                                               
                                                     
 # #     
 #is it necessary???                                         
                                                        
 So, you will need:                               
                                                        
 - Actually, the cooler itself                              
 - Power supply (5 - 12 volts)                        
 - Plastic bag (the thinner the better)       
 - Thread (preferably black and longer)                  
 - Scissors (preferably nooctpee)                      
 - Glue (PVA and higher)                                  
 - 10 - 20 minutes of time (if you are slow, like me,
then add the same amount)                             
                                                        
 It may also be useful:                           
                                                     
 - Soldered (15 - 65 watts)      
 - Solder (preferably with rosin inside)             
 - Luda (to tin (: ) (I recommend soldering acid
 Using scissors, cut thin strips of polyethylene
package.  Do not cut very long strips, because... at low
voltage looks like it will be xpehoro. Just right: 15 -
25 centimeters.                    
   After cutting the strips, glue their tips to the frames
ke cooler, naturally using glue and not snot, because
when joining with snot, the bonding strength is significantly
will fall. Personally, I glued it on PVA. Yes, glue the stripes-
ki from the side from which the cooler blows, otherwise it will be
na - the strips will be sucked into the cooler and may even tear!   
   Next we take two wires that stick out from the coOoler
and plug them into the power supply (or solder them) without mixing them up
while polarity. When you turn on the power supply, the cooler will start
blow on the strips, and they will begin to rise and twitch.
Well, are we just going to stand there with a cooler in our hands??? (What a
I'm naive, but does anyone actually collect anything?
having read the article first???) It would be necessary to somehow
secure... The question is - how?  Do you think I'm a thread
just for show, I added it to the list of things I need
things? No, not just like that (but just to show off (: )!           
   The fact is that for pisishniks in the building everything is on
in their places, everything is screwed (notas in my Spec). Well
and the cooler is not far behind - it is screwed tightly
connected to the power supply (or other cooled part)
=> there simply must be holes in it, and they are represented
you know, there is (something incredible) there. These are located
holes in the corners of the cooler frame. Of course, you've already figured it out
the whole chip with a thread - we thread it into these holes, and
We hang the cooler by threaded threads on something, what
higher (I have it hanging on the crossbar for curtains, look-
looks impressive).                                     
   Now we turn on the power supply again and drive from the
shining part of the interior!!! By the way, relatives and friends
they will be surprised by such a feature and look at it in fascination
in all eyes (verified). A particularly impressive cooler is
the child looks good on black hutkax (they are almost invisible
(: ).                                                   
                                                        
 Post Script:                                       
 pussy - SuXx!!!