ZX Pilot #36
11 марта 2000 |
|
Hard - the problem of temporary protection discs from the record.
H A R D (C) SERGIUS PUZZLER Problem of temporary protection CDs from the record. This note I address in the first place those who are concerned about the problem of gluing disks 5.25 "to write protection, and only then lovers of all kinds of bells and whistles. And it is this. Those who stick with write_protect slot in the near future faced with a temporary withdrawal defense - ripped / recorded / taped. When I little confidence in their drive (I had Electronics 5213 - God rest his soul!) or himself, to avoid this irreversible, sometimes fatal, surgery, came up with his little bells and whistles, which allows you to write to disk glued. And recently, just a couple of months ago, it finalized the deal and get what I put on your own risk. Now, with this little gadgets can also temporarily protect an unsealed drive. The scheme is simple to horror: three-way switch, either on your taste, color and size and three wiring. Switch mount anywhere on the body of companies, it is better not very far away from the drive. Located on the upper side of your drive photodiode as just opposite the protect-hole inserted diskettes, and otpaivaete from one of his contacts conductor. Next, guided by the following scheme: FD # (O) # x # 1 x - unsolder 2 # - solder 3 PD - photodiode of record switch to disc 1 as usual 2 is always forbidden 3 is always enabled Typically, for an average of (2) switches, the contact is not provided, and as seen by the scheme, he told us and no longer needed. Now, if your disk is protected by a plastic, and should record - Use the 3 position. Esle is not protected by a plastic disc, and you want it Temporary Protection - Position 2. Respectively in position 1 entry is allowed only in an unsealed drive. Reading the floppy disk, of course, possible at any position of the switch. Questions? I do not. Write letters - answer all! SP.WH!
Other articles:
Similar articles:
В этот день... 21 November