ZX Pilot #39
11 октября 2000 |
|
about different - works with 3.5 and 5.25 inch floppy drive on the Spectrum.
O R W A N O M I (C) ASTRAL RELOAD Yes! This incident happened to me a few days ago. Actually, nothing special, there was not any, but a glitch with my unit had a first time. Ever since I found myself on the Speccy 3.5 "FDD Samsung, along with imported 5.25 "brand new and also Samsung, took about a month. Having time to enjoy almost all the charms of the new OS, brought from the carpet and installed the next day, I needed to still feel the 3.5 "on Speccy. Here are just a turbo is not done, and drives the order of growling that prevented me from work on the computer at night. Successfully siphoned from the most basic necessary soft'a at 3.5 "I was going to exploit it further, but there it was. Somehow I came with my work and come back as far as 21:00, and planned to steer on Speccy, because there was still something to do. Suddenly I heard his voice parent with whom yet (do not thank God) live together: "Tired of me your creaking at night! Generally, you want rulez all night, dumped in the kitchen with his computer! "My reaction was not very positive, so But I did. Worked as usual, and only after morning there was a reverse permutation incident, the devices A, B, C, D - all were God knows how confused. Directory from the virtual disk D GLUK Reset Service printed somehow with 3.5 "FDD - it's me It seemed much too strange. Uniquely buggy is not my noggin, and Spec, or FDD. My first suspicion was the formation of signal device selection on the board controller, but after checking it turned out, that the controller works just perfect and glitches should not be. After a series of tests, it became clear failure of the system of my 3.5 "FDD - he is asshole, conflicted with all other devices. It simply intercepts requests to all other devices, though connected there was only one. Another oddity podmechennaya me, then, is not haunted; ( What the fuck indicator selected FDD, and it is 3.5 ", constantly lit, even when filed only one food? Consequently no request line sel have been reported. Just kind of garbage! .. Then I did not lose and little to pohimichil signaling for 3.5 "FDD and signal ... select sel was filed at the entrance FDD start or start the motor spinning (so to the idea is not to be). Only after activation line sel, connected to the start, the unit has intensified and remained so until the activation of another line of choice (with the normal flop, by the way, such a connection does not rolls). Became available a copy operation on the flop on the flop with 2 x FDD, and there were problems with promotion of a directory in the PC, RC. Oddly enough, but when you connect only one 3.5 "FDD, the system worked normally without suspicion of "faint" flop. Only the indicator on the front panel disguised himself as a permanent glow. My only discontent grew :-| At one point, I get tired such communication with the system and I decide what whatever cost to get yourself a normal 3.5 "FDD. How was it possible to do? Elementary, Watson! Should have been just a good rub PC-Schnick in the computer lounge. As the owner of the salon where I bought this FDD, I do not happened to know personally, then just change the "rotten" to normal was not possible. Looking warranty ... Neaego do, well, do not buy the same new 3.5 "if the old still on the 5 th month free warranty service? Although the seller could refer to a "wrong" food unit and send me to far distance, but then there is no examination no cost to accuracy. In unknown what kind of mood I wandered to the salon with the express purpose: to change this miracle of technology, bypassing the warranty, that, actually, I succeeded. "Thank you, pc'yuchnik tupenky! After waiting for the right moment, I had to go to the head, the head of all this and provide go wrong product I did. Next came the market, such as: "A Do not come to you in the evening, we do check ... "At this rudeness was told:" ... long time remove the lid and check? "And they went We perform a test of this very "a dead". Connecting the device and printing the catalog pc'shnik introduced me to a state ohereniya. On his pc everything works as expected! A did a write operation on the flop! "- I asked him, and tarried not pc'yuchnik. All sinker, written, erased, rulilos just fine ... but the LED on the 3.5 "FDD shone all the same. I logged gruzonul in the state of "fucking nedopetrivaniya" naive pc'yuchnika because He told me that him such glitches have never been, even how to behave 3.5 "when connecting to pc, which swallowed up all this crap, even though it was hung on pc'yuk dohrena what: 2cd and 2hdd. Thanks shown by perseverance and knowledge to communicate with pc and not just my 3.5 "FDD was replaced by yet a new one. Nevertheless managed to I thank God, save 325 rubles from her purse. So we conclude: I was very pleased, of course:))) Boys! If your device incidents happen, you'll have to bear them back, the more that connects you them to Spectrum'u, not pc, it should be know the following: 1. In no case does not say that your PC is not that system. 2. And do not check whether the device is pre- on the pc, to have something to gruzonut and more, so to speak, confidence in your rightness (better if you have a friend pc'yushnik)? 3. "No retreat, no surrender." 4. No "... check back later." 5. Check the device _only_ when your personal presence, or ask to change the unit of the familiar pc'yushnika (If you do not have anything to do with Mr. pc), if he does not goof in itself and not clumsy to install. " And most importantly - 6. The seller is always looking for a buyer, came from a broken product, real Loja, because repairs will cost him attendants. Much more advantageous to him _pokupka_ you the same goods again, rather than a pure exchange or repair warranty. Sam worked as a salesman in a department Dendy our city: - "Floating - know;) Shorter! Do not drive fool if you want to save Grandma and have a good comp. A Spectrum, as it turned out, shit _prakticheski_ not want to work, and that I am very smile! ;)))
Other articles:
Similar articles:
В этот день... 21 November