City #37
17 декабря 1999 |
|
Iron - schema extension video mode to 512x192 pixels for turbocharged Scorpion.
PLANET SHELEZYAKA ********** ************* (C) V. Kazakov This article is a logical prodolzheiem articles from the last issue, where he gave the scheme expansion of conventional video mode Scorpio. This once I give the same scheme for turbo-Scorpion. The material was provided by Hardy / FLASH. The author, a Unfortunately, not known. Schemes to enhance video modes TO 512 x 192 POINTS FOR turbirovanie SCORPIO o> D33/11 1533KP11 > D34/11 D2 / 5> 0, MX D2 / 6> 1 2 0> D40 / 9 D3 / 6> o March 1> D39 / 7 2> D17 / 6 D1 / 6> 0 3> D1 / 9 D1 / 5> 1 2 o 3 EXT> o V o oC > D34/10 o> D33/10 1533LE4 1533LE1 D13 / 6> 1 1o D31/12> 1o 1o o o D15 / 1> 1533LE1 LN2 D39/15 < D35 / 5> 1o o> D33 / 3 o> D33 / 4 > D34 / 3 EXT < 555ID7 _ DC 0 T 0 D55 / 7> oE 13 D1> 1 January _ 2o A12> oE C A6> E or 1 A3> 0 ___ 555TM9 2 RES> A15> 1 __ 3 WR> 2 All designations for chips are given a green card Scorpio. For yellow you can try to take the scheme Green Scorpion, in principle, they should be similar (only the turbo-charges). Before the slash indicate the number of chips, after - the number of output. The following conclusions circuits must be disconnected from the board or cut the track so to have been disconnected only those conclusions and only those chips! D3 / 6 - H2 IE7 D17 / 6 - ADDRESS SCREEN KP11 D33 / 3,4,10,11 - VIDEO KP13 D34 / 3,10,11 - VIDEO KP13 D39 / 7,15 - REGISTER IR10 D40 / 9 - REGISTER IR16 Advanced mode is enabled by setting the 1 st bit (Counting from 0-th) ports # EFF7. In Advanced mode, the screen color is determined by the color of the curb, and color assigned points to 0 or 7, depending on 2-nd bit color border (counting from 0-th). If the color of the curb is in the range 0 .. 3 is the color set of points will be white, otherwise - Black. Half of the images is located at # C000 and is # 1800 bytes. The other half is at # E000. The image can be in the fifth or seventh banks dependence on third-bit port # 7FFD. Symbols on alternate screen - one in one half and the other - In the next. If the screen will disappear individual pixel rows (vertically), then try to solder a capacitor to 15 foot D39 capacity somewhere up to 750 pF (or more, I had put on 750 pF)
Other articles:
Similar articles:
В этот день... 21 November