Buzz #02 19 марта 1997

NEWNESS - the original description to the Paracels Protection System v1.0

(C) Paracels


  Hi everyone! Now you can read a new razdelchik called
"NEWNESS", ie, "novelty". Its going to lead again, I 
(Paracels). This section will discuss the new program (and 
sistemki igruhi) coming to us from behind a hill or on our own 
Kovrov maker'ov. Well, today on the agenda PPSv1.0-sistemka, 
created by me. 

  Below is the original HELP to this prog, which should
attached to PPS'u ...


                   PARACELS PROTECTION SYSTEM

                      version 1.0 (48/128)

                   Copyright By Paracels 1997.


                      How To Use PPSv1.0?


  Hello dear users! This HELP is attached to the system program 
PPSv1.0. This small, but it seems to me very useful program 
will help you get rid of the need each time you make INTRO, 
DEMO or GAM'u, think, count and write ALKATRAZ PROTECTION. I 
hope you enjoy this program and will take pride of place on 
your disk. But just want to warn you that this is just a test 
version of the program, so do not Judge's strictly for the 
various bugs and errors. 

  Well, now for the most HELP'u ...

  The program can be downloaded as a 128, and in 48 mode, but
I want to frustrate users 48-x machines, since next version of 
this sistemki will only work on a 128-x machines. 

  After downloading the program itself is set on a disk and 
displays main menu. By default, the program is configured to 
drive before each disc surgery (SAVE 'LOAD).


  The main menu is as follows:


               1.Information about programm.

               2.Load code file.

               3.Save protected code file.

               4.Protect loaded code file.

               5.Select types of protectors.

               6.Quit ...


  Now on each item detail ...


  1.Information about programm (key <1>).
By selecting this option, you will see a small vent with sooo 
brief information about the program (version, copyright, the 
author, etc.). To pane disappeared and you are thrown back to 
the main menyuprosto press <ENTER>. 


  2.Load code file (key <2>).
Those who know English have already guessed why we need this 
item Clicking on the <2> you can download the code block you 
want protect. If no such file exists on disk, the program 
displays a message 'File not found.' and harden in anticipation 
of pressing <ENTER>. If same file that you want to download, 
can damage the system, the program again, politely say, 
'WARNING! System can be destroyed! '; On-<ENTER> and everything 
is OK In case, if your file has too low a starting address, the 
program is to understand and deal answer 'Invalid address!'.


  The program allows you to upload blocks from the address 
24500. I want you comfort: If during loading or write to the 
drive will not drive, just plug it and the program will load 
(write) All that is necessary, as if nothing had happened.


  One last thing: if you press <2> or <3> (see below), and 
suddenly ceased to want to download or burn unit, just push and 
<EDIT> Look at the inscription 'Operation interrupted!' (Which 
means' Operation aborted! "), And then click <ENTER> and do all 
that want to ...



  3.Save protected code file (key <3>).
Well, everything here is absolutely analogous to 'LOAD': enter 
a new name and write a protected block. If the unit was not 
protected, you may still be able to write it down, it will be 
just a copy of the original block but with a different (and 
perhaps the same) name is the same length and start address. 
Well, if you still used the program to its intended purpose 
file written by the lower address and greater length because of 
the decoder (or decoders). 


  4.Protect loaded code file.
That is the main function of my program, it somehow and allows 
you to protect your code block by one or by three powerful 
coding units, thus creating a modest ALKATRAZ PROTECTION. 
Protection process will begin only if downloaded a code block, 
otherwise the program will display the 'Code block is not 
loaded.' and will give it up until you have something that is 
not load. If you are, finally, something downloaded by clicking 
knoparya <4> will show 'Processing ...', and if all goes well, 
will come out as' Ok'. The program can also refuse to protect 
the block if none of the coders is not selected (see below). In 
this case, will show 'No one of protectors is not chosen.' In 
this version, only one-step protection, ie You can encode your 
code block only once, after which, if Once again you want to 
protect the same block, the program will say 'Block has been 
already protected. ' Future versions will be implemented 
three-stage protection and will also write new, more powerful 
encoders, etc. 


  5.Select types of protectors (key <5>).
After selecting this item will see a small menu:


                      Select mode:

               1.Arithmetical operations.

               2.Logical operations.

               3.Bits rolling operations.

in it, pressing on <1> to <3>, you can choose the types of 
encoders, which would later be used in a mode of 'PROTECT'. 
Here you are offered the following types of encoders: 


               1.Arifmeticheskie operation.

               2.Logicheskie operation.

               3.Operatsii the shift of the bits.

Your chosen style will be marked with a tick, and will be 
labeled (ie involved) as long as you do not remove mark. 
<ENTER>-Key exit from the submenu. 


  6.Quit ... (key <6>).
Well then, I think it's pretty clear ... While?! Who knows?!!


  A little advice on how you can achieve the effect of multi-
protection: download, protect, record and then repeat the same
most as many times as your heart desires. As a result, you get
block coded fairly decent number of coders.

  And what about running your unit: it must be run from an 
address under which was loaded. Future versions of PPS You will 
be asked to select either AUTOSTART (the address which you 
enter yourself), or output after decoding. 


  Well, it seems, and all ... And now some helloes ...

DykSoft, Kit Kat, Stranger, Incubus Group, VelSoft 
'WhistleSoft, Little coder, Demiurg Ash, MikoSoft, Integral 
Group, DJ CK' many others. Also Mega Hello To VAV from MCHG 
(Vladimir). 


                         C YA!!!


     COPYRIGHT BY PARACELS 1997. KOVROV CITY. 13/02/1997.

         ALL RIGHTS RESERVED BY PARACELS AND XFHG.


                     SPECCY FOREVER!!!

PS: At the moment, has written a new version PPS'a that

     exceed PPSv1.0-it PPSv2.0 128k only. This version has

     additional function of the output directory, rewritten (for

     correctly in the 128th mode) boot procedure, as

     corrected nekotoryk glitches. Oh, and most 
importantly-PPSv2.0 

     fully able to evaluate only the owners of 128-x machines. 
In 

     48th PPS mode, the second go, but when booting the above 
definition      lennogo address (I hope you guessed that it was 
49,152), about      izoydet most ordinary reset the system and 
perhaps even for      Visanen. For holders as much as 128k of 
memory available 

     40,535 bytes.

      The acquisition PPSv2.0 128k and later formed
     schaytes me personally (Paracels'u) or in the newspaper

     "Hints".