Iron - connecting the modem to the Amiga.

Stump #02
 ──────────────────── ─────────────────────
       "Amiga-rulez!!!", not sure...      
 ──────────────────── ─────────────────────
                                          
                   * * *                  
                                          
      When connecting the modem to the Amiga, use
 use standard 9-wire cables
 to connect to a serial port.
 For models with a "female" connector, you will need
 you will need a special adapter for
 connections to this connector are standard
 cable.  Under no circumstances
 no other con-
 clock cycles for connections other than those
 which are given in the following table-
 tse.   Depending on your model
 computer "Amiga" you may even damage
 share your modem when others connect
 contacts, because   some computer
 "Amiga" may have non-standard voltages

 body port!                         
      Information taken from: "Universal
 U-1496 series modem.  Guide for
 users. Document N83011501, Version
 2.21."  If you need "the following"
 table, then report it to the editor
 newspapers.      --- ALI ---   
                    

Share your thoughts about the article