Zhelezyaka - This section has appeared in our newspaper again.

+^+^+^+^+^+^+^+^+^+^+^+^+^+^+^+^+^+^+^+^+ 
 +^+HARDWARE+^+               
               
+^+^+^+^+^+^+^+^+^+^+^+^+^+^+^+^+^+^+^+^+ 
                                          
 Soldered by Sokol/Infotek :)             
              
 Hello, here I am again 
this section in our newspaper. Today we 
Let's talk again about the QUORUM computer, and 
again about finalizing it.                    
   Have you ever noticed how when you ask 
watch some demos you have mowed multi- 
color, slowed down in some places 
music, and other nightmares. And the whole point is 
what, but the whole point is that you have insufficient 
botana "temporary".  So let's 
Let's start refining it.                   
   IN"QUORUM"with an unfinished makeshift 
about 69,000 clock cycles are generated “per int” and 
only 312 unfolds on the screen 
lines.                                    
   Fixing the first one is quite simple - 
you need to find a section of the circuit inlower right 
corner of the board, moving away from the right edge of the board 
one row of mikrukhs look up to the middle 
us (right edge) and see three of these 
pin, then according to the diagram:                  
                                          
                 |  - somewhere else   
                 - board side     
                 | - connect to 8th     
    break - x o 8 position     
            11 o'clock |                        
                 o                        
                   o 10                   
                                          
   With this the first part is done, now you have 
The duration of the "int" corresponds to you 
Pentagon (71660).  Next you need to make 
to write 320 lines instead of 312, for this purpose 
you will need one mikruha LI1 (series can 
be any) which will be involved 
five legs - two for it to hold 
huddled (at the same time for food :), three more 
for business...                               
   Take the new LI1, turn it with the key 
to the left, shorten the top left a little 
and lower right leg, the rest carefully 
bend upward and cut off the thin part of the but- 
gi. Then find on the board already soldered- 
nal LI1 (second row from the right, fourth from the bottom) 
zu and accordingly solder to it until 
LI1 treated by you with findings that "tor- 
chat".                                     
   Now find a mikruhuUES (third row 
on the right, fourth from the bottom), she has 2 and 3 protrusions 
waters are soldered together and go to another 
side of the board. They shouldn’t be allowed into other 
the other side - tear them off from the other side - 
rons and solder them to the 3rd leg LI1 (on- 
crippled). Then connect the 9th leg of UES 
with the 1st leg LI1, and finally the 11th leg 
UES with the 2nd leg LI1.                     
   If your computer started working after this, 
Puter, then I congratulate you - you have a pentago- 
novo temporary                          
                                          
PS: Izv.  for verbal description - draw 
this is dark...                             
                                          
      For this I ask you to take your leave (c)I