ZX Emulator 0.30b Bags

First of all, I want to say that the sound has become much better, FDI support is absolutely great!
Secondly, a bunch of glitches have been discovered!

1. At the first start (without ".ini") it freezes when defining the SB interrupt,
there is _5_, but for me it is _7_! It would be possible to check the variable "BLASTER"
parameter "Ix", where x is the interrupt number.
2. When the key is assigned as "ScreenDump",
works crookedly, that is, when you press any of the arrows,
"ScreenDump" is triggered, so I had to set "ScreenDump" to !
3. No error handling! For example: if you specify the name of a non
file on the command line, the emulus either freezes or displays a bunch of
nonsense on the screen.

───────────< Begin File: "ZX_EMUL.TXT" >───────────
The emulator supports setting parameters via the command line. You can
specify just one parameter - the file name, but its type can be different; the emulator recognizes this
type itself. Supported file types:
*.TRD - the disk image file replaces the disk in drive A;
*.FDI - the same;
*.Z80 - the snapshot file will be loaded at startup;
*.SNA - the same;
*.SCR - the screen dump will be loaded into memory and the emulator will enter standby mode;
*.INI - use an alternative fileconfiguration.
It is very convenient to install these extensions to automatically call the emulator.
───────────< End File: "ZX_EMUL.TXT" >───────────
4. The emulsion hangs by name without type!
5. Sometimes there are glitches with FDI, until I figured out where it came from.

Wishes: Make support in Kbd, this is for Is-Dos (stop).
Well, and everything else!

All the best. /──────────────────────\ [ Fantasy World - Rulez ]
Sincerely, │ Wanderer 'Sagacious' │ [ Getting up early - Must Die]
─────────────────── ────\──────────────────────/ [ Station 106.8 - Rulez ]
... It's better to be alone than with just anyone...

like speed. This is perhaps the most important thing.
A GUI is needed. For this, I suggest using Whatcom C, in protected mode
(pmode).

The ability to skip frames is necessary, then on weak machines (like
my 586-133 24m) you can have fun, and not think about where on
the x128 drive :) (coming soon FDI support for x128 !)

Regards,
Random
--
Lord of Chaos.
e-mail: ran...@cybermail.net

Concern Chaos WWW HQ: http://www.cybermail.net/~random/

It was like this: Vitaly Samoylov 16 Dec 97 at 02:11 was making speeches to Vladimir.
Well, I wrote it.

VS> First of all, I want to say that the sound has become much better, FDI support is complete
VS> great!
VS> Secondly, a bunch of glitches were discovered!
[...skp...]
Oh my, and when it flew by, which I didn’t notice, throw it with soap, PPPPPLLLLLSSSSS!

╔══─══─═─═─── ── ─ ─ -
║ Max (aka LMS/Inside Law) [TEAM SPECCY rOOleZZZZ]
╚══─══─═─═─── ── ─ ─ ─

─────────────── ─────────────────────── ────────────────────── ───────────────────
In distant times (17 Dec 97), Ser Max wrote on a scroll Vitaly Samoylov,
Bequeathing "Re: ZX Emulator 0.30b Bags", and today (19 Dec 97) I decided
to intervene:
───────────────────────────────── ──────────────────────────── ──────────────────

VS> Its Author promised to update it with the correction of glitches. So wait! Otherwise
VS> soap is a bit much.
Well, let’s say, not so much.
But I already got it, although now I’m jellying. :(

VP> like speed. this is perhaps the most important thing.
VP> GUI is needed. for this I suggest using Whatcom C, in
VP> protected mode (pmode).

VP> you need the ability to skip frames, then on weak
VP> machines (like my 586-133 24m) you can have
VP> fun, and not think about where on the x128 drive :) (coming soon FDI
VP> support for x128 !)

That's for me already it occurred to us, let's do it

Sincerely
┬ ┬┌┐┬┐ ┐┬┬
╨ґ╨╙ґ╨╙ ╨ ╨

> VP> in general, a suggestion is to make the table a little different. instead of
> VP> have several bytes (3. 1 byte SShift, 2byte CapsShift, 3rd
> VP> letter/code) then the keys can be set as:
>
> VP> iBM 1st 2nd 3rd
>
> VP> ESC SS nope A
> VP> END SS nope E
> VP> PgUp nope CS 3
>
> VP> what's wrong with this method?
>Everything is good except the implementation, you will have to write everything again, and add new buttons
> - 5 minutes.