SOS for the Pentagon

Hello, All!
/*Urgent*/
Due to an oversight, we removed all the jumpers from the /Pentogon/ 128k board
Who knows how to fix this problem - tell me.
The board has the following appearance - if you look from the side of the elements
so that the connector for the drive is on the top and right, then
there is a wide positive bus running from the bottom.
Connections please send according to a circuit like -

D40 pin 13 - D22 pin 4

Thanks in advance,
Dmitriy.

Cry for him while he’s alive!

Hello Dmitriy Yakovlev! In a message of 07 Aug 97 Dmitriy Yakovlev wrote to All:

DY> /*Urgent*/
DY> By mistake, they removed all the jumpers from the board /Pentogon/ 128k
DY> Who knows how to fix this - let me know.
DY> The board looks like this - if you look from the side of the elements so
DY> so that the connector for the drive is on top and on the right, then from below there is a wide
DY> positive bus.
DY> Please send connections according to a circuit like -

DY> D40 pin 13 - D22 pin 4

Sorry, there is no diagram, but as far as I remember, the only jumper led the power to
VG, in my opinion 12 volts. I'll try to find the circuit, and if I find it, I'll email
the connections.

Regards, Alex from FFC COMPUTERS.