Pentagon128 --> Pentagon512 !

Eugene AKA Point777 of CrazyBrothers/Phantasy

TV> in general, once again ;) I’m launching RamDoctor 2.0 by Tyatin Sergey
TV> it shows that the configuration port is OK, the computer has 512 K RAM (I don’t doubt it
TV> ;)) but here’s the trouble - when the RAM is full (when yet
TV> has not gone beyond 128) everything is OK, as soon as it starts to go higher
TV> then immediately the rake begins in the form of some stripes on the screen,
TV> freezes, well, in general it crashes...

And on Scorp, at the very end of the memory test, the video page is filled with muck.
But when pressed, this “muck” smoothly disappears (as if it was intended that way). What
on the live, what on the emulator. Or “we emulate exactly to the point of glitches” (c)CF?
²All: does anyone else experience this?

TV> I don’t even know what it is, although I redid the regeneration, changed the buffer
TV> (IR23 to IR22)! who knows??? tell me plzzz! just don't send me
TV> to the author of the ramdoctor, he works on the converted Leninets1 and
TV> everything is cool, then let's get to work??? circuit for the Pentagon, but doesn’t want to work,
TV> that’s the left computer :(((

Or maybe the doctor is left? What he writes on our local “Syntheses” is generally
a joke. From floating speed to the Pentagon.

Yours truly, Vladimir Frunze AKA Hexman/BYTEX.
[Team ZX ASM] [Team Metallica] [TeamArt Works]

TEV> ehhh, I was stuck with one problem, but then another happened,
TEV> with a sub;(

Bullshit! :-)))

TEV> in general once again ;) time I launch RamDoctor 2.0 by Tyatin Sergey
TEV> it shows that the configuration port is - OK, the computer has 512 K RAM (I don’t doubt it
TEV> ;) ) but here’s the trouble - when the RAM is full (when
TEV> has not yet gone beyond 128) everything is OK, as soon as it starts to go higher then
TEV> immediately the rake starts in the form of some stripes on the screen, freezing,
TEV> well, it basically crashes, I don’t even know what it is this, although the regeneration
TEV> was redone, the buffer was changed (IR23 to IR22)! who knows??? tell me plzzz!
TEV> just don’t refer me to the author of the ramdoctor, he works on the
TEV> converted Leninets1 and everything is cool, then let’s get to work??? circuit for
TEV> Pentagon,
TEV> but doesn’t want to work, that’s the left computer :(((

There may be a problem in the temporary operation of the knobs. The Pentagon requires the installation of
fast knobs with the letters A, or B, or without a letter, but no more. You can
try a delay on the ras with a conder of about 100 picoforads, or in the gap of the ras
resistor from 100 to 510 ohms, the more, the more reliable. If that doesn’t help, the delay on the IR22 (or 23) memory read buffer in the form of a conductor on legs 1,or
11. If this doesn’t help, heat the guns with a lamp until one (usually a buggy one) completely flies out under a continuously running test, which is in a special ROM. Will the old proprietary sinclar test by any chance show an error from address #C000? Be sure to check and write what happened.

Sincerely, Alex from FFC COMPUTERS.

>
> Yours truly, Vladimir Frunze AKA Hexman/BYTEX.
> [Team ZX ASM] [Team Metallica] [Team Art Works]