MC5313
ZXNet echo conference «zx.spectrum»
I welcome All and want to talk to him about the 'MC5313':
Long life and prosperity to you, All!
A friend on the subject is trying to align the heads. The upper one, in principle, already reads, and the
lower one stands like a glove and how to adjust it?
We tried to use the Samara adjuster, everything is OK with the upper one, but how to
adjust the lower one is unknown.
Tell me, plz...
Sincerely, Nickolay Zabrodotsky AKA ProfeSSor F0lken
■Unsubscribed at 15:36.
... There will be beer and there will be everything else.
So, good man, first you still need to adjust the lower head, and only
then the upper one. When I had a “Pro”, I had fun with this, I adjusted the MC5305.
And there are few ways to adjust the lower head: you can push the stepper motor in
(carefully), you can move the head a little by loosening the fastening at the place
of connection with the drive belt from the stepper motor. Sexual, I note,
occupation.
Hi, Nickolay!
17 Jan 98, Nickolay Zabrodotsky writes to All:
NZ> A friend on the subject is trying to adjust the heads. The top one, in principle, already
NZ> reads, but the bottom one stands like a glove and how can it be adjusted? We tried
NZ> to use the Samara adjuster, everything was OK with the top one, but
NZ> it was unknown how to adjust the bottom one. Tell me, please...
The lower one is adjusted first of all by moving the stepper with the entire system.
Its azimuthal correction is generally impossible, so only
the hit is adjusted.
And only then the top...
With best wishes - Andrey Khristov (ha...@robin.alt.ru)
[Team Horse Aviation] [Team beer, girls & sofa]
[Team Electric Welding Must Die!] [Team Khasan Border Guards]
Nickolay is that you?
...why did you tell everyone about the MC5313?
NZ> A friend on the subject is trying to adjust the heads. The upper one, in principle, already
NZ> reads, but the lower one stands like a glove and how can it be adjusted?
NZ> We tried to use the Samara adjuster, with the upper one everything is OK, but how
NZ> to adjust the lower one is unknown. Tell me, plz...
you need to start tuning FROM the BOTTOM head - by shifting the stepper
motor and installing the 0TRK sensor correctly.
After the lower one is configured = the upper one is adjusted, which is not
so difficult.
Idea Is that clear?
Good Luck...
... Windows working. Do you want (w)aiting or (s)leeping