Hardware Bulletin — ZXM-Phoenix rev.07, ZXM-SMUCCard, ZX Next

SibNews #0A

Hardware Bulletin

Latest updates on zx.clan.su

21 June 2018

Errors in the documentation for Profi v.4.x and v.5.x computers have been described:

http://zx.clan.su/forum/8-164-1

30 April 2018

An updated version of InfoGuide #7, “Standardization of ZX BUS interfaces and buses,” has been published:

http://zx.clan.su/forum/7-82-1

The system for designating interfaces and buses has been simplified and made consistent. Pinouts for the bus interface on the Timex Computer 2068 have been added, and those for the Timex Computer 2048 and Quorum 128 have been clarified. The architecture of the planned NemoBus v.1.2 has undergone significant changes, making it possible to avoid the need for such a radical evolutionary development as NemoBus v.2.0. A description has been added of the dynamic DMA request interface for the NemoBus v.1.2 bus, as well as memory management in the CPU0–CPU3 windows using the NemoBus v.1.2 bus.

28 January 2018

A corrected schematic of the original GS has been posted in the “Correct GS Schematic” topic:

http://zx.clan.su/forum/11-132-1

Another graphical error was found in the schematic itself: the pin numbers for signals C, D, Q, and Q/ in flip-flop DD5.1 did not match the reference data for the chip.

Domestic clone development

ZXM-Phoenix rev.07

Pavel Ryabtsov has released the first batch of the ZXM-Phoenix rev.07, designed by Mick:

http://zx-pk.com/forum/viewtopic.php?f=7&t=10102

The batch has almost sold out, so if you don’t want to wait for the next one, hurry up and place an order.

There are no fundamental changes in this revision; the only notable addition is an extended-ROM manager that allows ROMs of up to 512 KB to be addressed. There are, however, many small changes aimed at improving the reliability of the circuit.

The seventh revision is something of an anniversary edition: it was released 10 years after the original revision and is the eighth ZXM-Phoenix revision by number. Mick did not set out to develop the architecture in this revision; he simply tried to give the project a final polish and make a definitive version of the ZXM-Phoenix, so he would not have to return to it again. Whether he will really manage to leave the Phoenix behind, we’ll find out in the future. But the computer’s name itself suggests that it will be difficult to bury it for good :) And judging by the reports on the board’s debugging process, this revision is clearly not the last :)

ZXM-SMUCCard

Mick has finally decided to release the ZXM-SMUCCard, which was ready two years ago. It combines SMUC v2.0, ZSD, and NemoIDE:

http://zx-pk.com/forum/viewtopic.php?f=7&t=4391

The card is primarily aimed at Scorpion users who want to have three devices in one package and save ScorpionBus slots. The ZXM-SMUCCard follows the NemoBus v1.1m standard and uses a connector with imperial spacing, so there will be no problems with the new Scorpion boards that use the SL62 slot. Older Scorpions, however, will have the usual problem with metric spacing.

A feature of the card is its combined Nemo and SMUC IDE controllers, which allow the same HDD to be accessed through the SMUC and NemoIDE ports. Ironically, this very feature has caused some users to voice unfounded concerns that software for different controllers could damage each other’s partitions. And it seems that, as usual, Mick, the device’s developer, will have to deal with other people’s unfounded concerns :)

Vega+ & ZX Next

It looks as though the Vega+ saga has reached its logical conclusion: the collectors have begun reclaiming the money invested in the bankrupt company. The ZX Next Kickstarter campaign, meanwhile, has entered its decisive stage.

I won’t hide the fact that I had doubts about the optimism of the Next team, who showed a shell casing on Kickstarter, given the murky story surrounding the sudden disappearance of the case manufacturer and the experience of being taken for a ride with Vega+. The fact that they showed the bottom of the casing but not the side with the mounting points was suspicious: it was impossible to tell which computer the casing was for. I even predicted that if there were no case by autumn, there wouldn’t be one any time soon at all.

However, while this article was waiting to be assembled into the June issue of SibNews, the Kickstarter campaign did show real progress in manufacturing the cases. Even so, my prediction was right: at best, shipment of assembled machines to backers will begin at the very end of summer.

Well, we’ll wait until the case reaches users so we can compare the real thing with the photographs by Richard Dickinson, who, sadly, did not live to hold the case he designed in his own hands. Rick Dickinson died after a long illness on 24 April 2018, aged 62, in Texas, USA.

I hope the finished case will be a worthy memorial to him, and a lasting tribute—something Spectrum users can experience every day—to this remarkable designer and person who created the Spectrum’s external appearance.

Share your thoughts about the article