Insanity - modification of the drive controller on Byte.

∙...
       When I was little, I was often hit on the head :)
∙·········································· ∙
 Ha! Here I am! I am sure that not a single soul noticed my disappearance.
knowledge, and meanwhile, I haven’t been online for A WEEK AND A HALF! Vi-
No what happened to my burnt-out computer. I think you are not without interest
please learn about my misadventures on this matter.
 And everything happened because of my Byte (Rulez :)). In general, I wanted-
I'd like to make the modification described in "TURBO_rec". It's so beautiful there
all the charm of this device was accurately described that I, swallowing drool and
licking his lips, he decided to commit madness (not for the first time ;)). Namely me
woke up Hamer at 2 a.m. with the howling of the terminal and macros: “From-
Call me, I have a question!!!" Hamer burst into tears after a minute of life -
with a dignified macro-flow: “The flag is in your ass!” and note the following text:
Tom: “You write your question, and I’ll think about whether I should wake up or
no "... Not paying attention to such a boorish message (so what
you can still expect from Hamer :)), I laid out the essence of my question.
 For almost half an hour Hamer patiently explained to me what diodes look like
and a resistor. Finally it dawned on me that the diode is: "Glass tube-
a barrel with two wires around the edges and three stripes." And the resistance
torus: “A ceramic tube, also with two wires on the edges.”
In general, I'm done! :).
 Having redrawn the diagram onto a piece of paper, II tried to understand for a long time: two translations
Are intersecting lines really intersecting? :). In general, once
picking up the computer, I felt like a patient who had been given
scalpel and said: “Appendicitis?! We have self-service!” :).
Naturally, I cut off the wrong leg of the microcircuit, and because of my
a screwed tee in the socket, an unpleasant short circuit occurred,
because of which a couple more mikruhs burned...
 The silence of the night was cut through by the roar of a wounded deer :). swearing loudly
and cursing my “nearby” life, I began to look in the heaps
broken equipment (of which I have accumulated quite a lot over the course of a couple of years :))
necessary details. Everything was found and replaced, but mikruhi with "neta"
foot - it didn’t turn out. For almost a week, with pain in my heart, I looked at
a pile of plastic and metal, which turned out to be my unfortunate computer. By
on the advice of the same Hamer, I have already decided to go to the market for this
damn: "155 LACH" when... Oh miracle!
 Ars once tried to connect an ATM to my monitor, inverted
sending a signal with this particular little device!
 Probably the dance that I performed in honor of the computer that started working,
could compete with the ritual dance of an aborigine, which year
I ate some grass and finally caught a “piece of meat” in the shape of a hedgehog.
 In short, I, wise from experience, bit off “that leg” and spent a long time experimenting
mented with these diodes and resistor...
 In the second hour of fussing, I singed my hair with a soldering iron and only
but thanks to the aquarium standing nearby, Isaved my hair :).
 Launching INSULT for the twentieth time (if you remember, it was in it
they promised a spinning ball of dots, without jerking and under normal
music) I finally got the desired result. Yelling loudly "Hurray!"
I started running all the slow demos I knew and... cool
then it broke off! They didn't work for fuck's sake! In general, the beauty of this
the device was in accelerated loading in "GONDOMED" (space is already possible
do not press), the same in INSULT and... that's it! For now that's all I have
managed to get the most out of this modification. Since I don’t have “UFO_2”, then
its performance on Bytes is in question. There is a suspicion
that since UFO2 should load, then why not “ChV” work?
 By the way, for those who want to do this modification on their own,
but they are just as lame in electronics as I am - I’ll give you a hint
how to do this without problems (so that you don’t have to suffer like
me).
 You solder two diodes and a cutter together, as I showed in the figure.
                  Solder the resulting end (0) onto the raised
        │ │ │ leg of the microcircuit (to the one where it is indicated on the diagram: ra-
        1 2 3 tear off). Attention ! I couldn’t move in for a long time, ok...
        ║ █ ║ is called, diodes should be “thick strip”
        └─┼─┘ down! Otherwise, when loading, TR-DOS issued Disk Er-
          │0 ror of the ninth sector. In the diagram (mine) 1 and 3 - di-
               odes, 2 - resistor. Now it's not hard to guess
what“1” goes to the second mikruh (it’s immediately to the left), “2” goes to +5v (I
soldered onto the power connector. There are four "pins". Left - +5v. Two
middle - ground, extreme (fourth) - +12v) and "3" - per cent.
This “method” is soldered to me. I specifically described it in such detail,
because I'm not the only one. Several times I lost a point
when the computer hangs “Everything,” I thought, “is awesome!” Perhaps now mine
the torment will save someone from such “minus cuts” ;).
 Taking this opportunity, I ask you to “whistle” :) who has UFO_2 and that’s it
those programs that were described there. I will be very grateful. By the way,
people! Let's take a walk in the full version of "ChV". Rumors have reached me
hey, someone has already passed it. Share with your neighbor :). I'm
I'll play and give it away :). I would be glad to buy it, but I’ve been on fried food for a week now
bread and coffee. There's no time for Crows here (except in gastronomic establishments)
Lyakh :)).
 Now some interesting news. Somewhere at the end of March,
At the beginning of April, I will become the “lucky owner” of Pisyuk. So,
whoever needs anything from him :) - I’ll be happy to help.
 From March 8 to March 15, I will be in Polotsk. Who needs postcards with views?
Polotsk and local beer (they say it’s good) - I accept orders
(JOKING :)).

 In general, oddly enough, but life goes on... why would it be like that?

                                Reverend Abbot Werewolves or
                                             Uncle Werewolf :)∙······························································∙